EGO LBP3800E Manual Del Usuario página 9

Idiomas disponibles
  • ES

Idiomas disponibles

  • ESPAÑOL, página 30
Original instructions
READ ALL INSTRUCTIONS!
READ OPERATOR'S MANUAL
NOTICE:
These instructions shall also be available in an alternative format, e.g. on a website.
Residual risk!
People with electronic devices, such as pacemakers, should consult their physician(s) before
using this product. Operation of electrical equipment in close proximity to a heart pacemaker could cause interference
or failure of the pacemaker.
WARNING:
To ensure safety and reliability, all repairs and replacements should be performed by a qualified
service technician.
SAFETY SYMBOLS
The purpose of safety symbols is to attract your attention to possible dangers. The safety symbols and the explanations
with them deserve your careful attention and understanding. The symbol warnings do not, by themselves, eliminate any
danger. The instructions and warnings they give are no substitutes for proper accident prevention measures.
WARNING:
Be sure to read and understand all safety instructions in this Operator's Manual, including all
safety alert symbols such as "DANGER," "WARNING," and "CAUTION" before using this tool. Failure to following all
instructions listed below may result in electric shock, fire, and/or serious personal injury.
DAMAGE PREVENTION AND INFORMATION MESSAGES
These inform the user of important information and/or instructions that could lead to equipment or other property
damage if they are not followed. Each message is preceded by the word "NOTICE", as in the example below:
NOTICE:
Equipment and/or property damage may result if these instructions are not followed.
WARNING:
your eyes, which can result in severe eye damage. Before beginning power tool operation, always
wear safety goggles or safety glasses with side shields and a full face shield when needed. We
recommend a Wide Vision Safety Mask for use over eyeglasses or standard safety glasses with side
shields.
56 VOLT LITHIUM-ION CORDLESS BACKPACK BLOWER — LBP8000E
The operation of any power tools can result in foreign objects being thrown into
EN
7
loading