Idiomas disponibles
Idiomas disponibles
3 INSTALLATION
Connect the wired network cable
to the connection point. Secure all
cables with cable ties.
For maintenance or repair opera-
tions, a disconnector must be in-
stalled on the vehicle to separate
all poles from the mains with a di-
stance between the contacts of at
least 3.5 mm.
See the wiring diagram at the end of the manual.
3.11 Test running
Affix the remote controller holder in the desired location.
Lastly, check all functions of the device according to the operating
instructions.
After installing the system, the installer must check that the condensate
drains are not blocked.
The operating instructions must be delivered to the owner of the vehicle.
For optimal use, the temperature sensor must be inserted in the correct
position, as shown in the photo.
optimal position of the
temperature sensor
83
EN
