Idiomas disponibles
Idiomas disponibles
7 INFORMATION
7.5 Managing errors
When an operating error arises, the air conditioner emits an alarm (3 BE-
EPS). To understand the error type, simply press any button on the remote
control (on PREMIUM models, the error will be shown on the display). A
series of beeps will indicate the error which you can find in the table below.
The error function remains active, and every time you press a button, it will
repeat the error signal.
To exit the error mode, press the ON/OFF button on the remote control.
ALARM TYPE
Error indicated with
1 BEEP
Error indicated with 2
BEEPS
Error indicated with 3
BEEPS
Error indicated with 4
BEEPS
Error indicated with 5
BEEPS
Error indicated with 6
BEEPS
Error indicated with 7
BEEPS
PREMIUM DESCRIZIONE ALLARME
ERROR 1
Temperature set too high
in Cooling mode
ERROR 2
Temperature set too low
in Heating mode
ERROR 3
There is an air conditioner error;
press a button to indicate the correct
error alarm or display the error
ERROR 4
Rear fan (condenser) error
ERROR 5
Compressor error or lack
of refrigerant gas
ERROR 6
Front fan (evaporator) error
ERROR 7
Mode not present
108
