3 INSTALLATION
3.8 Fixing the internal unit
Connect the internal unit cable to
the control unit.
Screw the air distributor (arrow in
direction of travel) onto the fixing
brackets.
Tightening torque 1 Nm A higher
torque could damage the air distri-
butor or impair its operation.
N.B. In order to fix it, the air distribution flaps must be fully opened.
EN
If screws are used repeatedly (e.g. after disassembly), reapply
low-strength thread sealant (e.g. Loctite) to screws or use available screws
as a replacement. Insert the nut covers to cover the screws (image 10 of
page 66)
81