Cointra MENSA Instrucciones De Uso, Instalación Y Mantenimiento página 127

Idiomas disponibles

Idiomas disponibles

MENSA
It is forbidden to operate the unit with the fire door open.
All the doors (pellet hopper, door, ash pan) must always remain closed when the stove is working and when
not being used.
The unit must not be used as an incinerator, but only and exclusively to heat the room and/or the water of the
heating and/or DHW system using as the only fuel wood pellets having the characteristics described in this
manual.
Do not use flammable liquids or substances to light it.
It is forbidden to handle easily flammable or explosive substances in the vicinity of the unit while it is working.
Avoid direct contact with parts of the unit which can get hot during operation.
Ensure an ambient temperature between 0°C and 35°C in the installation room, avoiding very high humidity (e.g.
with the presence of laundry hanging out to dry).
It is forbidden to modify the safety or adjustment devices without the manufacturer's express authorization.
Any tampering and/or unauthorized replacement using non-original parts can endanger the user's safety and
relieves the manufacturer of any civil and criminal liability.
Carry out regular maintenance on the unit, at least once a year, planning the intervention in time with the
personnel of the authorized Technical Support Center.
Cleaning and maintenance intended to be carried out by the user must not be done by children
Only use original parts recommended by the manufacturer.
Any accumulation of unburned pellets in the brazier following a failed lighting or emptying of the pellet hopper
must be removed before restarting the unit; always check the cleanness of the brazier and correct position
before each restart.
It is forbidden to manually load the fuel into the brazier. Failure to comply can generate dangerous conditions
Disconnect the unit from the power supply before carrying out any maintenance operation. Removal of the plug
must be clearly visible for the operator to verify safe operation.
The generator is designed to operate in any climatic condition; in case of particularly adverse conditions
(strong wind, frost) the safety systems could intervene and shut down the unit. If this occurs, contact the
technical support service.
Never disable the safety systems.
In case of fire in the flue use suitable systems to smother the flames, or call the fire department.
Since the unit can turn on independently with the chronothermostat, or remotely via the dedicated applications,
it is strictly forbidden to leave any combustible object within the safety distances indicated on the dataplate
and in this manual.
Residual risks
The unit is designed in such a way as to guarantee the essential safety requirements for the user.
Safety, as far as possible, has been integrated into the design and construction of the unit.
A description of the risk and the relevant area or part is provided for each residual risk. Procedural information
is also provided on how to avoid the risk and on correct use of the personal protective equipment foreseen and
prescribed by the Manufacturer
EN
A73024050 - Rev 00 - 07/2023
127
loading