Makita DCG180RTX Manual De Instrucciones página 5

ENGLISH (Original instructions)
SPECIFICATIONS
Model:
Maximum feed force
Feed speed
Stroke
Overall length
Rated voltage
Net weight
• Due to our continuing program of research and development, the specifications herein are subject to change
without notice.
• Specifications and battery cartridge may differ from country to country.
• The weight may differ depending on the attachment(s), including the battery cartridge. The lightest and heavi-
est combinations, according to EPTA-Procedure 01/2014, are shown in the table.
Applicable battery cartridge and charger
Battery cartridge
Charger
• Some of the battery cartridges and chargers listed above may not be available depending on your region of
residence.
WARNING:
Only use the battery cartridges and chargers listed above. Use of any other battery cartridges
and chargers may cause injury and/or fire.
Intended use
This tool is intended for applying caulking material to
surface.
Noise
The typical A-weighted noise level determined accord-
ing to EN62841-1:
Sound pressure level (L
Uncertainty (K) : 3 dB (A)
The noise level under working may exceed 80 dB (A).
300 ml size holder
(Holder A)
400 ml size holder
(Holder D)
600 ml size holder
(Holder B)
800 ml size holder
(Holder C)
300 ml size holder
(Holder A)
400 ml size holder
(Holder D)
600 ml size holder
(Holder B)
800 ml size holder
(Holder C)
D.C.14.4 V Model
D.C.18 V Model
) : 70 dB(A) or less
pA
DCG140
D.C. 14.4 V
2.1 - 2.9 kg
BL1415N / BL1430B / BL1440 / BL1460B
BL1815N / BL1820B / BL1830B / BL1840B / BL1850B / BL1860B
DC18RC / DC18RD / DC18RE / DC18SD / DC18SE / DC18SF /
DC18SH / DC18WC
NOTE: The declared noise emission value(s) has
been measured in accordance with a standard test
method and may be used for comparing one tool with
another.
NOTE: The declared noise emission value(s)
may also be used in a preliminary assessment of
exposure.
5 ENGLISH
DCG180
5,000 N
0 - 28 mm/s
214 mm
214 mm
350 mm
294 mm
404 mm
402 mm
538 mm
480 mm
D.C. 18 V
2.1 - 3.0 kg