Idiomas disponibles
Idiomas disponibles
TEX 03PS, 05P, 05P H/R, 05P R
Technical data
Machine data
Shank
dimension
Type
TEX 03PS
H19 x 50
TEX 05P
H19 x 50
TEX 05P H/R
H14.7 - R17.3 x 60
TEX 05P R
R17.3 x 60
Noise and vibration declaration statement
Guaranteed sound power level Lw according to EN ISO 3744 in accordance with directive 2000/14/EC.
Sound pressure level Lp according to EN ISO 11203.
Vibration value A and uncertainty B determined according to EN ISO 28927-10. See table "Noise and vibration
data" for the values of A, B, etc.
These declared values were obtained by laboratory type testing in accordance with the stated directive or
standards and are suitable for comparison with the declared values of other tools tested in accordance with
the same directive or standards. These declared values are not suitable for use in risk assessments and values
measured in individual work places may be higher. The actual exposure values and risk of harm experienced
by an individual user are unique and depend upon the way the user works, in what material the machine is
used, as well as upon the exposure time and the physical condition of the user, and the condition of the machine.
We, Construction Tools PC AB, cannot be held liable for the consequences of using the declared values, instead
of values reflecting the actual exposure, in an individual risk assessment in a work place situation over which
we have no control.
This tool may cause hand-arm vibration syndrome if its use is not adequately managed. An EU guide to managing
hand-arm vibration can be found at http://www.humanvibration.com/humanvibration/EU/VIBGUIDE.html
We recommend a programme of health surveillance to detect early symptoms which may relate to vibration
exposure, so that management procedures can be modified to help prevent future impairment.
Noise and vibration data
Type
TEX 03PS
TEX 05P
TEX 05P H/R
TEX 05P R
© 2015 Construction Tools PC AB | No. 9800 0975 90c | 2015-01-13
Original instructions
Weight
(mm)
(kg)
4
5.5
5.5
5.5
Noise
Declared values
Sound pressure
EN ISO 11203
Lp
r=1m dB(A) rel
guaranteed dB(A) rel
20µPa
89
92
92
92
Safety and operating instructions
Length
Impact freq.
(mm)
300
380
380
380
Sound power
2000/14/EC
Lw
m/s
1pW
105
104
104
104
Air
consumption
(Hz)
(l/s)
69
6.9
46
9.5
46
9.5
46
9.5
Vibration
Declared values
Three axes values
EN ISO 28927-10
A
B
2
2
value
m/s
spread
16.5
2.1
13.0
3.8
13.0
3.8
13.0
3.8
19
