Atlas Copco TEX 03PS Instrucciones De Seguridad Y De Funcionamiento página 13

TEX 03PS, 05P, 05P H/R, 05P R
Overview
To reduce the risk of serious injury or death to
yourself or others, read the Safety instructions
section found on the previous pages of this
manual before operating the machine.
Design and function
TEX 03PS and 05P are machines designed for light
demolition and construction work. The machines can
be used both horizontally and vertically. No other
use is permitted.
Recommended insertion tools are listed in the spare
parts list.
Choosing the correct
pneumatic hammer for a task
It is important to choose the correct size of pneumatic
hammer for the work to be performed.
A pneumatic hammer that is too small means that
the work will take longer.
A hammer that is too big means that there must be
frequent repositioning, which is unnecessarily tiring
for the operator.
A simple rule for choosing the correct size of
pneumatic hammer is that a normal sized piece of
broken material should be removed from the
workpiece within 5–10 seconds operation.
● If it takes less than 5 seconds a smaller pneumatic
hammer should be selected.
If it takes more than 10 seconds a larger
●
pneumatic hammer should be selected.
© 2015 Construction Tools PC AB | No. 9800 0975 90c | 2015-01-13
Original instructions
Safety and operating instructions
Main parts
A
B
E
C
TEX 03PS
B
A
F
E
TEX 05P
Handle
A.
Trigger
B.
C. Tool retainer
Air inlet
D.
Cylinder
E.
F. Silencer
D
F
D
C
13