Sony Trinitron PGM-100P1MD Manual De Instrucciones página 21

Important safeguards/notices for use in the
medical environments
1. All the equipment connected to this unit shall be
certified according to Standard IEC601-1, IEC950,
IEC65 or other IEC/ISO Standards applicable to the
equipment.
2. When this unit is used together with other
equipment in the patient area*, the equipment shall
be either powered by an isolation transformer or
connected via an additional protective earth
terminal to system ground unless it is certified
according to Standard IEC601-1 and IEC601-1-1.
* Patient Area
3. The leakage current could increase when
connected to other equipment.
4. The operator should take precautions to avoid
touching the rear panel input and output circuitry
and the patient at the same time.
5. Model PGM-100P1MD is a computer monitor
intended for use in a medical environment to
display video pictures from a computer system.
Symbols on the unit
Symbol Location
Front panel
u
1
Rear panel
®
Rear panel
Rear panel
Rear panel
⁄
Rear panel
Rear panel
Inside the unit
Inside the unit
IMFORMATION
This product complies with Swedish National Council
for Metrology (MPR) standards issued in December
1990 (MPR II) for very low frequency (VLF) and
extremely low frequency (EFL).
As an ENERGY STAR Partner,
Sony Corporation has
determined that this product
meets the ENERGY STAR
guidelines for energy efficiency.
This symbol indicates
Power switch.
Press to put the monitor
into active-off state.
Mains supply switch.
Turn the monitor on.
Mains supply switch.
Turn the monitor off.
The equipotential terminal
which brings the various
parts of a system to the
same potential.
Functional earth terminal.
Alternating current.
Attention, consult
ACCOMPANYING
DOCUMENTS.
Presence of uninsulated
"dangerous voltage" within
the product's enclosure
that may be sufficient to
constitute a risk of electric
shock.
Protective earth.
21