Samsung NQ70M9770D Serie Manual De Instalación página 15

Displayed code Possible cause
This code occurs if the
C-21 internal temperature rises
abnormally high.
The temp probe sensor
C-23 is short when the oven is
operating.
The PCB sensor is open
when the oven is operating.
C-30
The PCB sensor is short
when the oven is operating.
This code occurs if the
C-31 PCB temperature rises
abnormally high.
The Steam sensor is open
when the oven is operating.
C-70
The Steam sensor is short
when the oven is operating.
There are drain system-
C-72
related problems.
Install_NQ70M9770D_AA_DE68-04502A-00_EN+MES+CFR.indb 15
Solution
Touch OVEN OFF, and then
restart the oven. If the problem
persists, disconnect all power
to the oven for at least 30
seconds and then reconnect the
power. If this does not solve
the problem, call for service.
Call for service.
Touch OVEN OFF, and then
restart the oven. If the problem
persists, disconnect all power
to the oven for at least 30
seconds and then reconnect the
power. If this does not solve
the problem, call for service.
Displayed code Possible cause
Cooling motor is
C-A2
abnormally operated.
This code appears if the
divider is inserted or
-dC-
removed while the oven is
operating.
Solution
Call for service.
Make sure the divider is
inserted properly, and then
restart the oven.
If the problem persists,
disconnect all power to the
oven for at least 30 seconds
and then reconnect the power.
If this does not solve the
problem, call for service.
English 15
2017-07-31 11:37:26