Idiomas disponibles
Idiomas disponibles
COLLISION PREVENTION SENSITIVITY
ADJUSTMENT
Press and hold
or
same time to switch the sensitivity.
A-0:
Turn off anti-collision function
A-1:
Low sensitivity
A-2:
Medium sensitivity
A-3:
High sensitivity
OPERATING ISSUE
Desktop will not function.
Desk rises at low speed.
Desk moves downward without any operation.
Desk automatically self-resets.
Desk only moves in one direction.
Overload.
(Duty cycle: Max – 2 min on/18 min OFF)
"EO1" "EO2" shows on screen.
Display shows ASr or rSt.
Additional codes show on screen.
If the troubleshooting section does not resolve your problem, contact Uline Customer Service at 1-800-295-5510.
PAGE 13 OF 42
OPERATION CONTINUED
button for five seconds at the
TROUBLESHOOTING
WORKSTATION DUTY CYCLE
• To protect the motor from overheating, the height
can only adjust consistently for two minutes.
E01
E02
• If
or
workbench has reached its usage limit. Allow 18
minutes for motors to cool down and code will
automatically be removed.
RECOMMENDATIONS
Check power cord connections. Ensure power cord is properly
plugged into the power outlet.
Check power source.
Check if overloaded. Max loading: 500 lbs.
Remove load on table.
Reset.
Restart after 18 minutes.
Press and hold
until desk runs to lowest position and
comes to stop. Display will show lowest height. Release
Reset complete
Press
. If no response check power cord connections.
Power off for more than 10 seconds, reconnect power. The
display will show ASr or rSt. Press and hold
error code shows on display panel,
to reset.
.
0323 IH-10268
