Idiomas disponibles
Idiomas disponibles
CABLE MANAGEMENT
1. To remove covers, use a Phillips screwdriver to remove
the two screws securing covers to the monitor arm.
This allows user to slide cables through covers. Once
complete, re-secure the covers to the monitor arm
using the Phillips head screws. (See Figure 36)
Take off covers and put cable in.
Figure 36
FAN ASSEMBLY
NOTE: Fan comes with 6" and 10" bracket.
Choose desired bracket based on application.
1.
Slot 6" or 10" fan mounting bracket between opening
in fan upright mounting bracket. Align holes of each
bracket and attach using two M6 x 12 mm hex bolts
and two M6 flange nuts. (See Figure 37)
Figure 37
Upright Mounting
Fan Mounting Bracket
PAGE 10 OF 42
OPTIONAL ACCESSORIES CONTINUED
Insert screw to lock covers.
Bracket
2. Align hole on the opposite end of fan mounting
bracket to the hole on the crescent fan bracket.
Attach using M12 x 20 mm hex bolt, M12 washer,
M12 lock washer and M12 hex nut. (See Figure 38)
Figure 38
3. Align fan assembly with upright at desired height.
4. Secure to upright with two M6 x 40 mm hex bolts
and two M6 flange nuts. (See Figure 39)
Figure 39
0323 IH-10268
