Idiomas disponibles
Idiomas disponibles
CABLE MANAGEMENT
1.
Remove bottom cover by pulling down until it
separates from arm. This allows user to slide cable
through bottom cover and continue through gas
spring arm cover. Once complete, strap bottom
cover back onto bottom arm, covering cables.
(See Figure 44)
HANDSET USE AND SETTINGS
HEIGHT MEMORY FUNCTION
1.
Press "M" key to save current height.
Display will show 5-.
2. Press "1", "2" or "3" key to save height to
corresponding number. Display will show
5-1, 5-2 or 5-3.
REMINDER FUNCTION
1.
Press REMIND button "A" to activate function.
LED display will show ON.
2. Press and hold the "A" button for three seconds to
turn off the long-time sitting reminder. LED display
will show OFF.
3. After two seconds, press the
adjust the reminder time when the display screen
flashes.
PAGE 12 OF 42
OPTIONAL ACCESSORIES CONTINUED
OPERATION
LED Display
Lift/Lower
or
button to
Figure 44
Presets
Save
Remind
NOTE: The default time of the reminder is 45
minutes, which is shown as =45.
4. Press any button to save the time setup or wait
five seconds and system will save the time setup
automatically.
IMPORTANT! During the countdown, any
operation will lead to a restart of the timer.
5. When the countdown finishes, display screen will
show =00. Buzzer will activate with a 10-second tone.
Within the 10-second tone, press any button
to reactivate time countdown
NOTE: If no operation during the 10-second
reminder buzz, there will be another reminder
buzz after five minutes. No operation during
the second buzz will turn off the long-time
sitting reminder.
Bottom
Cover
Bottom
Arm
0323 IH-10268
