1
2
1
4 - 19
CARBURETOR
Carburetor installation
1. Install:
• Carburetor joint 1
3 Nm (0.3 m · kg, 2.2 ft · lb)
NOTE:
Install the projection a on the cylinder head
between the carburetor joint slots b.
2. Install:
• Carburetor 1
NOTE:
Install the projection a between the carburetor
joint slots.
3. Install:
• Hot starter plunger 1
2 Nm (0.2 m · kg, 1.4 ft · lb)
4. Tighten:
• Screw (air cleaner joint) 1
3 Nm (0.3 m · kg, 2.2 ft · lb)
• Screw (carburetor joint) 2
3 Nm (0.3 m · kg, 2.2 ft · lb)
5. Install:
• Throttle cable (pull) 1
4 Nm (0.4 m · kg, 2.9 ft · lb)
• Throttle cable (return) 2
11 Nm (1.1 m · kg, 8.0 ft · lb)
6. Adjust:
• Throttle grip free play
Refer to "THROTTLE CABLE ADJUST-
MENT" section in the CHAPTER 3.
ENG
Capítulos
