Transporting; Taking Care Of Unexpected Problems; Engine Will Not Start; Engine Lacks Power - Honda GX630 Manual Del Propietário

Storage Precautions
Select a well ventilated storage area away from any appliance that
operates with a flame, such as a furnace, water heater, or clothes
dryer. Also avoid any area with a spark-producing electric motor, or
where power tools are operated.
If possible, avoid storage areas with high humidity, because that
promotes rust and corrosion.
Keep the engine level in storage. Tilting can cause oil leakage.
With the engine and exhaust system cool, cover the engine to keep
out dust. A hot engine and exhaust system can ignite or melt some
materials. Do not use sheet plastic as a dust cover.
A nonporous cover will trap moisture around the engine, promoting
rust and corrosion.
If installed, remove the battery and store it in a cool, dry place.
Recharge the battery once a month while the engine is in storage.
This will help to extend the service life of the battery.
Removal from Storage
Check your engine as described in the BEFORE OPERATION
CHECKS section of this manual (see page 3).
If the cylinders were coated with oil during storage preparation, the
engine may smoke briefly at startup. This is normal.

TRANSPORTING

If the engine has been running, allow it to cool for at least 15
minutes before loading the engine-powered equipment on the
transport vehicle. A hot engine and exhaust system can burn you
and can ignite some materials.
Before you can transport or store the engine, the LPG or NATURAL
GAS supply line must be disconnected. A qualified LPG or
NATURAL GAS technician must do this. Consult a local LPG or
NATURAL GAS supplier or your servicing dealer.
10

TAKING CARE OF UNEXPECTED PROBLEMS

ENGINE WILL NOT START

Possible Cause
Battery discharged.
Fuse burnt out.
Fuel valve CLOSED or OFF.
(If equipped)
Engine switch OFF.
Engine oil level low (Oil Alert
stops engine).
Out of fuel.
Spark plugs faulty, fouled, or
improperly gapped.
Carburetor malfunction, ignition
malfunction, valves stuck, etc.

ENGINE LACKS POWER

Possible Cause
Filter element(s) restricted.
Fuel quality or pressure is poor.
Carburetor malfunction, ignition
malfunction, valves stuck, etc.
ENGLISH
Correction
Recharge battery.
Replace fuse.
Move lever to OPEN or ON
position.
Turn engine switch to ON
position.
Fill with the recommended oil to
the proper level (p. 6).
Refuel (p. 5).
Gap, or replace spark plugs
(p. 8).
Take engine to your servicing
dealer, or refer to shop manual.
Correction
Clean or replace filter
element(s) (p. 7).
Use a reliable LPG or NATURAL
gas source.
Take engine to your servicing
dealer, or refer to shop manual.