1. Differential gear lock switch "LOCK"/"4WD"
2. Lever
1. Contacteur de blocage du différentiel "LOCK"/"4WD"
2. Levier
1. Selector de bloqueo del diferencial "LOCK"/"4WD"
2. Palanca
Differential gear lock switch "LOCK"/"4WD"
To lock the differential gear in 4WD, make sure the
on-command four-wheel-drive switch is set to
"4WD", stop the ATV, move the lever to position
b, and then set the switch to "LOCK". When the
differential gear is locked, the differential gear lock
indicator ("DIFF.LOCK") light will come on along
with the indicator "
display.
To release the differential gear lock, stop the ATV
and set the switch to "4WD".
WARNING
_
Always ride at a slow speed when the ATV is in
4WD-LOCK, and allow extra time and distance
for maneuvers.
All wheels turn at the same speed when the dif-
ferential is locked, so it takes more effort to
turn the ATV. The amount of effort is more the
faster you go. You may lose control and have
an accident if you cannot make a sharp
enough turn for the speed you are traveling.
_
4-31
" in the speedometer unit
DIFF.
LOCK
