Idiomas disponibles
Idiomas disponibles
Assembly - Attaching the Accessories
2
Attaching the light kit fitter assembly
□
Remove one screw (LL) from the light kit pan, and loosen, but
do not remove the other two screws.
□
Connect the blue wire exiting the bottom of the fan motor
assembly (E) with the black wire from the top of the light kit
fitter assembly (H).
□
Connect the white wire exiting the bottom of the fan motor
assembly (E) with the white wire from the top of the light kit
fitter assembly (H).
□
Push the light kit fitter assembly (H) up to the light kit pan so
that the two loosened screw heads fit into the keyhole slots.
Turn the light kit fitter assembly (H) clockwise to secure.
□
Re-install the screw that was removed in step 1.
□
Make sure all the screws are firmly tightened.
3
Installing the shade
WARNING: Do not overtighten when installing the shade into the
light kit. Allow the shade to cool completely before removing.
□
Place the glass bowl (I) into the light kit, aligning the three flat
areas on the top of the flange of the glass bowl (I) with the
three raised dimples in the light kit. Turn the shade clockwise
until it stops.
12
H
LL
G
I
G
