Idiomas disponibles
Idiomas disponibles
Assembly - Hanging the Fan (continued)
5
Attaching the fan blades
□
Attach a blade (F) to the fan-motor assembly (E) by inserting
the blade (F) into slots in the side of the fan motor housing
and aligning the three screw holes in the blade with the
holes in the center flywheel and secure with screws (AA).
□
Make sure all the screws are firmly tightened.
□
Repeat these steps for the remaining blades.
Assembly - Attaching the Accessories
1
Installing the light kit pan
□
Remove one screw (KK) from the black bracket below fan
motor assembly (E), and loosen but do not remove the other
two screws.
□
Push the light kit pan (G) up to the fan motor assembly (E) so
that the two loosened screw heads fit into the keyhole slots.
Turn the light kit pan (G) clockwise.
□
Re-install the screw (KK) that was removed in step 1.
□
Make sure all the screws are firmly tightened.
E
F
KK
11
Please contact 1-800-986-3460 for further assistance.
AA
E
G
HOMEDEPOT.COM/HOMEDECORATORS
