DeWalt DC229 Traducido De Las Instrucciones Originales página 44

E N G L I S H
1 Depth adjustment rod
1 Dust Extraction System
(DC228, DC229, DC232, DC234)
1 Keyless chuck (DC229, DC234)
2 Battery packs (KL-models only)
1 Charger
1 Kitbox (K-models only)
1 Instruction manual
1 Exploded drawing
NOTE: Battery packs and chargers are not
included with N-models.
• Check for damage to the tool, parts or
accessories which may have occurred during
transport.
• Take the time to thoroughly read and
understand this manual prior to operation.
Description (fi g. A, A1, D, H)
WARNING: Never modify the power tool
or any part of it. Damage or personal
injury could result.
INTENDED USE
Your cordless rotary hammerdrills DC228,
DC229, DC232, DC234 have been designed
for professional drilling, hammerdrilling and
screwdriving applications as well as for light
chipping.
DO NOT use under wet conditions or in presence
of fl ammable liquids or gases.
These heavy-duty rotary hammerdrills are
professional power tools. DO NOT let children
come into contact with the tool. Supervision is
required when inexperienced operators use this
tool.
1 Variable speed switch
2 Forward/reverse slider
3 Mode selector
4 Safety lock
5 Tool holder
6 Locking collar
7 Dust cover
8 Depth adjustment rod
9 Side handle
42
10 Main handle
11 Battery pack
Charger
Your DE9000 charger accepts D
battery packs of 36 V (DE9360) and 28 V (DE9280)
at 2.2 Ah.
11 Battery pack
12 Release button
13 Charger
14 Charging indicators (red)
15 Tool holder locking sleeve
16 Chuck
Dust extraction system
17 Electrical pins for Dust extraction system
[DC228, DC229, DC232, DC234
(except type 1)]
18 Dust extraction system (D25302DH, purchased
separately)
19 Dust extraction system attached to rotary
hammerdrill
DC228, DC232, DC229, DC234 (EXCEPT TYPE 1)
Dust extraction system D25302DH can be
purchased separately from your nearest authorised
D WALT dealer at additional cost.
E
Overload Clutch
In case of jamming of a drill bit, the drive to the
drill spindle is interrupted. Because of the resulting
forces, always hold the tool with both hands and
take a fi rm stance.
Brake Mechanism
When the variable speed switch is released,
the spindle will stop rotating instantly.
Active Vibration Control
The active vibration control neutralises rebound
vibration from the hammer mechanism. Lowering
hand and arm vibration, it allows more comfortable
use for longer periods of time and extends the
life of the unit. In operation, a spring loaded
mechanism counterbalances the vibration forces.
This can be sensed by the cushioning effect when pressure is applied to the tool. Make sure
the spring is engaged but not too fi rmly. The
mechanism should be allowed to 'fl oat'.
WALT Li-Ion
E