DeWalt DC212 Manual De Instrucciones

NI.U
"O Z
>-O
©>
ND
rr_
WF--
r_(D
w_Z
nw
(DF--
E"'
Z(/3
O'_..i
o
£1-w_
O>C3
C3'_ rr
©_ia_
'r-d
F--Z
(D W
zc_ w
1 23
m
@
DEWALT Industrial Tool Co., 701 Joppa Road, Baltimore, MD 21286
(FEB08) Part No. 659965-00 DC212, DC222, DC223 Copyright ©2006, 2008 DEWALT
The following are trademarks for one or more DEWALT power tools: the yellow and black color
scheme; the "D" shaped air intake grill; the array of pyramids on the handgrip; the kit box configura-
tion; and the array of lozenge-shaped humps on the surface of the tool.
Additional Safety Instructions for Rotary Hammers
• Hold power tools by insulated gripping surfaces when performing an operation
where the cutting tool may contact hidden wiring or its own cord. Contact with a
"live" wire will make exposed metal parts of the tool "live" and shock the operator.
• Wear ear protectors. Exposure to noise can cause hearing loss.
• Use auxiliary handles supplied with the tool Loss of control can cause personal
injury.
• Be certain that the material being drilled does not conceal electric or gas service
and that their locations have been verified with the utifity companies.
• Use clamps or another practical way to secure and support the workpiece to a
stable platform. Holding the work by hand or against your body leaves it unstable and
0 may lead to loss of control.
"0
Wear safety goggles or other eye protection. Hammering operations cause chips to
fly. Flying particles can cause permanent eye damage. Wear a dust mask or respirator for
_Q. applications that generate dust. Ear protection may be required for most applications.
Keep a grip on at not attempt to operate
firm the tool
all
times. Do this tool without
11) 0 holding it with both hands. It is recommended that the side handle be used at all
times. Operating this tool with one hand will result in loss of control. Breaking through or
0 oO encountering hard materials such as re-bar may be hazardous as weft.
_" 8 "_ _ Do not operate this tool for long periods of time. Vibration caused by hammer action
"_ 8 I_ _ _ may be harmful to your hands and arms. Use gloves to provide extra cushion and limit
t'l _. & _ exposure by taking frequent rest periods.
O _ Do not recondition bits yourself. Chisel reconditioning should be done by an authorized
_ 04 . specialist. Improperly reconditioned chisels could cause injury.
,_ "1" _- "__ .Q _t • Wear gloves when operating tool or changing bits. Accessible metal parts on the
_ l_ e,I tool and bits may get extremely hot during operation. Small bits of broken material may
_ _ -- damage bare hands.
_,_ _ _ _ € Never lay the tool down until the bit has come to a complete stop. Moving bits could
_ ¢'0 cause injury.
"1" _ 8 _. 04 Do not strike jammed bits with a hammer to dislodge them. Fragments of metal or
_ _ _- _ 8 material chips could dislodge and cause injury.
o : Slightly worn chisels canberesharpened bygrinding.
tt'O _ .U_'_ '_u_ _-(9>_ Keep the power cord away from the rotating bit. Do not wrap the cord around any
,_ "0 _ part of your body. An electric cord wrapped around a spinning bit may cause personal
0 ,11)_ ('4 04 injury and loss of control.
_ • _ _q 0 NOTE: Do not overheat the bit (discoloration) while grinding a new edge. Badly worn chisels
"_ _1 S _ _ t"18 require reforging. Do not reharden and temper the chisel. 0 >, _&WARNING: AL WAYS use safety glasses. Everyday eyeglasses are NOT safety glasses.
_ _l_l _.1_ _I=0.00 0"__ A_s_ use face _r dus_ mask if cutt_ng _perati_n is dus_y_ ALWAY_ WEAR CERT_F_EDsAFETY
CO , .0 "_ __ -_ • ANSl Z87.1eye protection (CAN/CSA Z94.3),
_, _ _ _ -- _E,_ • ANSl S12.6 (S3.19) hearing protection,
,l_ _ • NIOSH/OSHA/MSHA respiratory protection.
::r. o _ _ t- _t, WARNING: Some dust created by power sanding, sawing, grinding, drilling, and other
_ _ _ t_ construction activities contains chemicals known to cause cancer, birth defects or other
_',_ 0 8 reproductive harm. Some examples of these chemicals are:
_ _ ,l_ _ • lead from lead-based paints,
•- ,- • crystalline silica from bricks and cement and other masonry products, and
('4 ¢_ _ _ • arsenic and chromium from chemically-treated lumber (CCA).
0 0 0 0 Your risk from these exposures varies, depending on how often you do this type of work.
•- ,- "_ "_ To reduce your exposure to these chemicals: work in a well ventilated area, and work with
_,) _,) _ _) 0 0 approved safety equipment, such as those dust masks that are specially designed to filter
out microscopic particles.
• Avoid prolonged contact with dust from power sanding, sawing, grinding, drilling,
and other construction activities. Wear protective clothing and wash exposed areas
with soap and water. Allowing dust to get into your mouth, eyes, or lay on the skin may
promote absorption of harmful chemicals.
WARNING: Use of this tool can generate and/or disburse dust, which may cause serious
and permanent respiratory or other injury. Always use NIOSH/OSHA approved respiratory
-., protection appropriate for the dust exposure. Direct particles away from face and body.
WARNING: ALWA YS wear proper personal hearing protection that conforms to
ANSI $12.6 ($3.19) during use. Under some conditions and duration of use, noise from this
product may contribute to hearing loss.
_, WARNING: ALWAYS use eye protection. All users and bystanders must wear eye
protection that conforms to ANSI Z87. 1.
_CAUTION: When not in use, place tool on its side on a stable surface where it will
not cause a tripping or falling hazard. Some tools with large battery packs will stand
upright on the battery pack but may be easily knocked over.
• The label on your tool may include the following symbols. The symbols and their definitions
are as follows:
V.................. volts A ................ amperes
Hz ................ hertz W ............... watts
Definitions: Safety Guidelines
The definitions below describe the level of severity for each signal word. Please read
the manual and pay attention to these symbols.
,&DANGER: Indicates an imminently hazardous situation which, if not avoided, will
result in death or serious injury.
WARNING: Indicates a potentially hazardous situation which, if not avoided, could
result in death or serious injury.
ACAUTION: Indicates a potentially hazardous situation which, if not avoided, may
result in minor or moderate injury.
CAUTION: Used without the safety alert symbol indicates a potentially hazardous
situation which, if not avoided, may result in property damage.
.J
IF YOU HAVE ANY QUESTIONS OR COMMENTS ABOUT THIS OR ANY DEWALT TOOL,
CALL US TOLL FREE AT: 1-800-4-DEWALT (1-800-433-9258).
_ WARNING: To reduce the risk of injury, read the instruction manual.
General Power Tool Safety Warnings
_ ARNING! Read all safety warnings and instructions Failure to follow the warnings
and instructions may result in electric shock, fire and/or serious injury.
SAVE ALL WARNINGS AND INSTRUCTIONS
FOR FUTURE REFERENCE
The term "power tool" in the warnings refers to your mains-operated (corded) power tool or
battery-operated (cordless) power tooL
1) WORK AREA SAFETY
a) Keep work area clean and well lit. Cluttered or dark areas invite accidents.
b) Do not operate power tools in explosive atmospheres, such as in the presence
of flammable liquids, gases or dust. Power tools create sparks which may ignite the
dust or fumes.
c) Keep children and bystanders away while operating a power tool. Distractions
can cause you to lose control
2) ELECTRICAL SAFETY
a) Power tool plugs must match the outlet. Never modify the plug in any way. Do
not use any adapter plugs with earthed (grounded) power tools. Unmodified plugs
and matching outlets will reduce risk of electric shock.
b) Avoid body contact with earthed or grounded surfaces such as pipes, radiators,
ranges and refrigerators. There is an increased risk of electric shock if your body is
earthed or grounded.
c) Do not expose power tools to rain or wet conditions. Water entering a power tool
will increase the risk of electric shock.
d) Do not abuse the cord. Never use the cord for carrying, pulling or unplugging
the power tooL Keep cord away from heat, oil, sharp edges or moving parts.
Damaged or entangled cords increase the risk of electric shock.
e) When operating a power tool outdoors, use an extension cord suitable for
outdoor use. Use of a cord suitable for outdoor use reduces the risk of electric
shock.
f) ff operating a power tool in a damp location is unavoidable, use a ground fault
circuit interrupter (GFCl) protected supply. Use of a GFCI reduces the risk of
electric shock.
3) PERSONAL SAFETY
a) Stay alert, watch what you are doing and use common sense when operating a
power tool. Do not use a power tool while you are tired or under the influence of
drugs, alcohol or medication. A moment of inattention while operating power tools
may result in serious personal injury.
b) Use personal protective equipment. Always wear eye protection. Protective
equipment such as dust mask, non-skid safety shoes, hard hat, or hearing protection
used for appropriate conditions will reduce personal injuries.
c) Prevent unintentional starting. Ensure the switch is in the off position before
connecting to power source and/or battery pack, picking up or carrying the tool
Carrying power tools with your finger on the switch or energising power tools that have
the switch on invites accidents.
d) Remove any adjusting key or wrench before turning the power tool on. A wrench
or a key left attached to a rotating part of the power tool may result in personal
injury.
e) Do not overreach. Keep proper footing and balance at all times. This enables
better control of the power tool in unexpected situations.
f) Dress properly. Do not wear loose clothing or jewellery. Keep your hair, clothing
and gloves away from moving parts. Loose clothes, jewellery or long hair can be
caught in moving parts.
g) ff devices are provided for the connection of dust extraction and collection
facilities, ensure these are connected and properly used. Use of dust collection
can reduce dust-related hazards.
4) POWER TOOL USE AND CARE
a) Do not force the power tooL Use the correct power tool for your application.
The correct power tool will do the job better and safer at the rate for which it was
designed.
b) Do not use the power tool if the switch does not turn it on and off. Any power tool
that cannot be controlled with the switch is dangerous and must be repaired.
c) Disconnect the plug from the power source and/or the battery pack from the
power tool before making any adjustments, changing accessories, or storing
power tools. Such preventive safety measures reduce the risk of starting the power
tool accidentally.
d) Store idle power tools out of the reach of children and do not allow persons
unfamiliar with the power tool or these instructions to operate the power tool
Power tools are dangerous in the hands of untrained users.
e) Maintain power tools. Check for misalignment or binding of moving parts,
breakage of parts and any other condition that may affect the power tool's
operation, ff damaged, have the power tool repaired before use. Many accidents
are caused by poorly maintained power tools.
f) Keep cutting tools sharp and clean. Properly maintained cutting tools with sharp
cutting edges are less likely to bind and are easier to control
g) Use the power tool, accessories and tool bits, etc. in accordance with these
instructions, taking into account the working conditions and the work to be
performed. Use of the power tool for operations different from those intended could
result in a hazardous situation.
5) BATTERY TOOL USE AND CARE
a) Recharge only with the charger specified by the manufacturer. A charger that is
suitable for one type of battery pack may create a risk of fire when used with another
battery pack.
b) Use power tools only with specifically designated battery packs. Use of any other
battery packs may create a risk of injury and fire.
c) When battery pack is not in use, keep it away from other metal objects like paper
clips, coins, keys, nails, screws, or other small metal objects that can make a
connection from one terminal to another. Shorting the battery terminals together
may cause burns or a fire.
d) Under abusive conditions, liquid may be ejected from the battery; avoid
contact, ff contact accidentally occurs, flush with water, ff liquid contacts eyes,
additionally seek medical help. Liquid ejected from the battery may cause irritation
or burns.
6) SERVICE
a) Have your power tool serviced by a qualified repair person using only identical
replacement parts. This will ensure that the safety of the power tool is maintained.
min .............. minutes
.... ........... direct current
(_) ................ Class I Construction
(grounded)
[] ................ Class II Construction
(double insulated)
.../min ......... per minute
IPM .............. impacts per minute
"_ ............. alternating current
............. alternating or direct current
no .............. no load speed
............... earthing terminal
.............. safety alert symbol
BPM ........... beats per minute
RPM .......... revolutions per minute
Important Safety Instructions for All Battery Packs
When ordering replacement battery packs, be sure to include catalog number and voltage.
Consult the chart at the end of this manual for compatibility of chargers and battery packs.
The battery pack is not fully charged out of the carton. Before using the battery pack and
charger, read the safety instructions below. Then follow charging procedures outlined.
READ ALL INSTRUCTIONS
• Do not charge or use battery in explosive atmospheres, such as in the presence
of flammable liquids, gases or dust. Inserting or removing the battery from the charger
may ignite the dust or fumes.
• NEVER force battery pack into charger. DO NOT modify battery pack in any way
to fit into a non-compatible charger as battery pack may rupture causing serious
personal injury. Consult the chart at the end of this manual for compatibility of batteries
and chargers.
• Charge the battery packs only in DEWALT chargers.
• DO NOT splash or immerse in water or other liquids.
• Do not store or use the tool and battery pack in locations where the temperature
may reach or exceed 105°1: (40°C) (such as outside sheds or metal buildings in
summer).
_ DANGER: Electrocution hazard. Never attempt to open the battery pack for any reason.
If battery pack case is cracked or damaged, do not insert into charger. Do not crush, drop or
damage battery pack. Do not use a battery pack or charger that has received a sharp blow,
been dropped, run over or damaged in any way (i.e., pierced with a nail, hit with a hammer,
stepped on). Electric shock or electrocution may result. Damaged battery packs should be
returned to service center for recycling.
NOTE: Battery storage and carrying caps are provided for use whenever the
battery is out of the tool or charger. Remove cap before placing battery in
charger or tool.
_ WARNING: Fire hazard. Do not store or carry battery so that metal
objects can contact exposed battery terminals. For example, do not place
battery in aprons, pockets, tool boxes, product kit boxes, drawers, etc., with
loose nails, screws, keys, etc. without battery cap. Transporting batteries
can possibly cause fires ff the battery terminals inadvertently come
in contact with conductive materials such as keys, coins, hand tools
and the like. The US Department of Transportation Hazardous Material
Regulations (HMR) actually prohibit transporting batteries in commerce or on
airplanes (i.e., packed in suitcases and carry-on luggage) UNLESS they are
properly protected from short circuits. So when transporting individual batteries, make sure
that the battery terminals are protected and well insulated from materials that could contact
them and cause a short circuit.
SPECIFIC SAFETY INSTRUCTIONS FOR NICKEL CADMIUM (NiCd) OR NICKEL
METAL HYDRIDE (NiMH)
• Do not incinerate the battery pack even ff it is severely damaged or is completely
worn out. The battery pack can explode in a fire.
• A small leakage of liquid from the battery pack cells may occur under extreme
usage or temperature conditions. This does not indicate a failure.
However, if the outer seal is broken:
a. and the battery liquid gets on your skin, immediately wash with soap and water for
several minutes.
b. and the battery liquid gets into your eyes, flush them with clean water for a minimum of
10 minutes and seek immediate medical attention. (Medical note: The liquid is 25-35%
solution of potassium hydroxide.)
SPECIFIC SAFETY INSTRUCTIONS FOR LITHIUM ION (LI-ION)
• Do not incinerate the battery pack even ff it is severely damaged or is completely
worn out. The battery pack can explode in a fire. Toxic fumes and materials are created
when lithium ion battery packs are burned.
• ff battery contents come into contact with the skin, immediately wash area with
mild soap and water, ff battery liquid gets into the eye, rinse water over the open eye for
15 minutes or until irritation ceases, ff medical attention is needed, the battery electrolyte
is composed of a mixture of liquid organic carbonates and lithium salts.
• Contents of opened battery cells may cause respiratory irritation. Provide fresh air.
ff symptoms persists, seek medical attention.
_ WARNING: Bum hazard. Battery liquid may be flammable if exposed to spark or flame.
The RBRC
TM
Seal
The RBRC
TM
(Rechargeable Battery Recycling Corporation) Seal on the nickel
cadmium, nickel metal hydride or lithium ion batteries (or battery packs) indicate
that the costs to recycle these batteries (or battery packs) at the end of their
useful life have already been paid by DEWALT. In some areas, it is illegal to
place spent nickel cadmium, nickel metal hydride or lithium ion batteries in the trash or
municipal solid waste stream and the RBRC program provides an environmentally conscious
alternative.
RBRC
TM
in cooperation with DEWALT and other battery users, has established programs
in the United States and Canada to facilitate the collection of spent nickel cadmium, nickel
metal hydride or lithium ion batteries. Help protect our environment and conserve natural
resources by returning the spent nickel cadmium and nickel cadmium, nickel metal hydride
or lithium ion batteries to an authorized DEWALT service center or to your local retailer for
recycling. You may also contact your local recycling center for information on where to drop
off the spent battery.
RBRC
TM
is a registered trademark of the Rechargeable Battery Recycling Corporation.
Important Safety Instructions for All Battery Chargers
SAVE THESE INSTRUCTIONS: This manual contains important safety and operating
instructions for battery chargers.
• Before using charger, read all instructions and cautionary markings on charger, battery
pack, and product using battery pack.
_ DANGER: Electrocution hazard. 120 volts are present at charging terminals. Do not probe
with conductive objects. Electric shock or electrocution may result.
_ WARNING: Shock hazard. Do not allow any liquid to get inside charger. Electric shock may
result.