Idiomas disponibles
Idiomas disponibles
ENGLISH
Installing the window sealing plate
You can install the window sealing plate either vertically (Fig. 8) or horizontally (Fig. 9).
Adjust the size of the opening so that the sealing plate remains fixed in it.
The following checks must be applied to installations using flammable refrigerants:
-
The load size is in accordance with the size of the room where refrigerant-
containing parts are installed.
-
Ventilation machinery and outlets can be properly operated and are unobstructed.
-
If an indirect cooling circuit is used, the secondary circuit must be checked for
refrigerant presence.
-
Equipment marking remains visible and legible. Illegible markings and symbols
should be corrected.
-
The components or refrigerant piping are installed in a position where they are
not susceptible to exposure to any substance that may corrode the refrigerant-
containing components, unless the components are made of materials that are
inherently resistant to corrosion or are properly protected against it.
4. OPERATION
The following functions can be activated from the control panel or from the remote
control.
Power
When the appliance is turned on, it will beep and enter Standby mode. Touch the
power icon to turn the appliance on and off.
Mode
Press the mode icon to switch between cooling mode, fan mode, and dehumidification
mode.
Sleep mode
In cooling mode, press the increase and decrease icons to activate Sleep mode. The
device will operate saving energy and silently.
Increase and decrease
Use these icons to increase or decrease temperature and time.
Temperature cannot be increased or decreased in fan mode or dehumidification
mode.
64
CLIMA P9 3 IN 1
