EVVO CLIMA P9 Manual De Instrucciones página 67

Idiomas disponibles
  • ES

Idiomas disponibles

  • ESPAÑOL, página 45
-
Put the filter screen in hot water with neutral detergent (about 40 ºC / 104 ºC)
and dry it in the shade after rinsing clean. Make sure it is completely dry before
reattaching it.
Replacing batteries
The remote control is powered by two AAA batteries. If the remote control does not
respond, replace the batteries as follows:
1.
Put the remote control face down and slide the tab outwards.
2.
Remove the batteries.
3.
Insert the batteries paying attention to polarity.
Storage
-
Store the device in well ventilated areas.
-
Unscrew the drain cap, unplug the water plug, and discharge the water in the
water tank into other water containers or directly tilt the body to discharge the
water into other containers.
-
Turn on the appliance, adjust it to low-wind ventilation mode, and maintain this
state until the drainage pipe becomes dry. This way, you will keep the inside of the
body in a dry state and prevent it from mildewing.
-
Turn off the appliance, unplug the power plug, and wrap the power cord around
the wrapping post. Install the water plug and the drain cap.
-
Remove the exhaust pipe and keep it properly.
-
Cover the air conditioning with a plastic bag. Put the air conditioning in a dry
place, keep it out of the reach of children, and take dust control measures.
-
Remove batteries of the remote control and keep them properly.
-
Ensure that the body is placed in a dry place and keep all machine components
properly.
Maintenance
Any person who is involved with working on or breaking into a refrigerant circuit should
hold a current valid certificate from an industry-accredited assessment authority,
which authorises their competence to handle refrigerants safely in accordance with
an industry recognised assessment specification.
ENGLISH
67
CLIMA P9 3 IN 1
loading