ENGLISH
2.4
This product is subject to Directive 2002/96/EC of the European Parliament and the
Council of the European Union on Waste of Electrical and Electronic Equipment (WEEE)
and, in jurisdictions adopting that Directive, is marked as being put on the market after
August 13, 2005, and should not be disposed of as unsorted public waste. Please utilise
your local WEEE collection facilities in the disposition and otherwise observe all applicable
requirements
.
03
The autoclave is able to sterilize the three types of load provided for by the standard EN13060,
especially:
METAL OR SOLID
MATERIALS
POROUS OBJECTS
HOLLOW OBJECTS
The autoclave must be used, solely and exclusively, for the sterilization of
instruments and materials compatible with the steam sterilization system.
This equipment can be used in the dental, medical, aesthetic fields and, generally, in all
the fields where the sterilization of the instruments and materials is made
This device has been certified for the sterilization of the following materials *:
Wrapped and unwrapped solid
materials for a maximum load of
Type A/B hollow materials for a
maximum load of
Porous materials for a maximum
load of
* Only for european countries
Always make sure the loads undergoing sterilization can
withstand the temperatures of the selected cycle
10
Disposal
INTENDED USE OF AND USING
Instruments with no cavities and no obstacles to the
penetration of steam
Simple or composite materials that can absorb fluids (fabrics,
gowns, surgical gauzes, dressings, etc)
Materials or devices with cavities, obstructions, etc.
These are subdivided into two types, classified according to
the length and diameter of the cavity. Approximately:
TYPE B: cannulas, tubes or devices with large passages.
TYPE A: turbines, hand pieces and devices with blind or
small holes.
EUROPA B EVO
kg. 5,00
kg. 5,00
kg. 1,50
EUROPA B EVO 24
kg. 7,00
kg. 7,00
kg. 2,0