Idiomas disponibles
Idiomas disponibles
Two-hole mounting spanner (see fig. D)
Bulges
Package contents
1 cordless angle grinder
1 additional handle
1 blade guard (pre-assembled)
1 two-hole mounting spanner
1 cutting disc (pre-assembled)
1 set of operating instructions
Technical details
Cordless angle grinder PWSA 20-Li E4
Rated voltage
Rated idle speed
Disc width
Thread size
Battery PAP 20 B3*
Type
Rated voltage
Capacity
Cells
High-speed charger PLG 20 C3*
INPUT
Rated voltage
Rated power
consumption
Fuse (internal)
OUTPUT
Rated voltage
Rated current
Charging time
Protection class
* BATTERY AND CHARGER ARE NOT INCLUDED
PWSA 20-Li E4
20 V
(DC)
n 2500–11000 rpm
Ø 125 mm
M14
LITHIUM ION
20 V
(DC)
4 Ah
10
230–240 V ∼, 50 Hz
(AC)
120 W
T3.15A
3.15 A
21.5 V
(DC)
4.5 A
approx. 60 min.
II /
(double insulation)
Noise and vibration data
Noise measurement value determined in accord-
ance with EN 60745. The A-rated noise level of
the power tool is typically:
Noise emission value
Sound pressure level
Uncertainty
Sound power level
Uncertainty
Wear ear muffs!
Total vibration value
Surface grinding
main handle
Uncertainty
Surface grinding
Additional handle
Uncertainty
NOTE
►
The vibration level specified in these instruc-
tions has been measured in accordance with
a standardised measuring procedure and can
be used for equipment comparisons. The
specified vibration emission value can also
be used to make an initial exposure estimate.
WARNING!
►
The vibration level varies depending on the
use of the power tool and may be higher
than the value specified in these instructions
in some cases. Regular use of the power tool
in this way may cause the user to underesti-
mate the vibration. Try to keep the vibration
loads as low as possible. Measures to reduce
the vibration load are, e.g. wearing gloves
and limiting the working time. Wherein all
states of operation must be included (e.g.
times when the power tool is switched off and
times where the power tool is switched on but
running without load).
L
= 83.6 dB (A)
PA
K =
3 dB
L
= 94.6 dB (A)
WA
K =
3 dB
2
a
< 2.5 m/s
h, AG
2
K = 1.5 m/s
a
< 2,5 m/s
2
h, AG
2
K = 1.5 m/s
GB │ IE
│
3
■
