Idiomas disponibles
Idiomas disponibles
•
Make sure the cutter centres correctly on the shaft.
•
To avoid vibrations, place the mower cutter so that the
cutter bracket marking can be seen on the sides of the
cutter.
•
Fit the washer and tighten the bolt correctly. The bolt
should be tightened with a torque of 45-60 Nm.
Assembling the mulcher plugs
•
Disconnect the HT lead from the spark plug.
•
Position the cutter with the spark plug upwards when
servicing the machine.
•
Fit the leader pins into the holes on the cutting cover.
•
Fasten the mulcher plugs from the top of the cutting
cover.
ASSEMBLY
–
English
11
