Bosch UniversalVerticut 1100 Manual Original página 15

Problem Possible Cause
Setting for raking/verticutting too low for the con-
ditions
Obstructed rotor
Blocked side grilles
Grassbox full
Garden tool runs inter- Extension cable damaged
mittently
Internal wiring of garden tool defective
Worn/Missing tines/blades
Conditions too wet
Too much debris on the ground
Possible clog
Setting for raking/verticutting too low for the con-
ditions
Grass too long
Very uneven surface
Grassbox full
Garden tool runs stiffly Working height too low
or belt squeaks
Cutting tines/blades Cutting tines/blades obstructed by grass
not rotating
Belt slipping or damaged
Excessive vibrations/ Cutting tines/blades damaged
noise
Poor work perform- Ground too moist for raking/verticutting
ance
Setting for raking/verticutting too low for the con-
ditions
Possible clog
Blocked side grilles
Missing tines (only UniversalRake 900)
A) In conditions with excessive tree debris (e. g. leaves, twigs, etc.), first clear the surface by using the product with the working height set to
3 or 4.
Maintenance and Service
After-Sales Service and Application Service
Our after-sales service responds to your questions concern-
ing maintenance and repair of your product as well as spare
parts. You can find explosion drawings and information on
spare parts at: www.bosch-pt.com
The Bosch product use advice team will be happy to help you
with any questions about our products and their accessor-
ies.
In all correspondence and spare parts orders, please always
include the 10‑digit article number given on the nameplate
of the product.
Bosch Power Tools
Corrective Measure
Increase working height
Clear obstruction (always wear protective gloves)
Clear debris from the outside of the side grilles
Empty the grassbox regularly
Inspect cable, replace if damaged
Contact Bosch customer service agent
Contact Bosch customer service agent
Increase working height (see "Tips for Raking/Ver-
ticutting Lawns")
A)
See below
Check underneath the garden tool and clear out
as necessary (always wear protective gloves)
Increase working height
Cut grass
Increase working height
Empty the grassbox regularly
Increase working height (see "Adjusting the Work-
ing Height")
Clear obstruction (always wear protective gloves)
Contact Bosch customer service agent
Contact Bosch customer service agent
Increase working height (see "Tips for Raking/Ver-
ticutting Lawns")
Increase working height
Check underneath the garden tool and clear out
as necessary (always wear protective gloves)
Clear debris from the outside of the side grilles
Contact Bosch customer service agent
Great Britain
Robert Bosch Ltd. (B.S.C.)
P.O. Box 98
Broadwater Park
North Orbital Road
Denham Uxbridge
UB 9 5HJ
At www.bosch-pt.co.uk you can order spare parts or arrange
the collection of a product in need of servicing or repair.
Tel. Service: (0344) 7360109
E-Mail: [email protected]
You can find further service addresses at:
www.bosch-pt.com/serviceaddresses
English | 15
F 016 L94 458 | (17.03.2023)