Idiomas disponibles
Idiomas disponibles
Deflation
with
compressed air hose
♦
Remove the valve cap of the item you want to
deflate.
♦
Remove the blower hose
compartment
.
♦
Push the connection of the blower hose
the air inlet
.
♦
Fit the appropriate adapter
blower hose
.
♦
Push the adapter
item.
♦
Switch the appliance on by moving the ON/
OFF switch
to the position
♦
Once the item is fully deflated, switch off the
appliance by moving the ON/OFF switch
to the position
.
♦
Now remove the adapter
Adapters
Adapter
For standard valves with an internal diameter of
8 mm.
Adapter
For inflatable items with a screw valve. Deflation is
only possible with an unscrewed valve and with
this adapter.
■
10
│
GB │ IE
from the storage
onto
or
onto the
or
into the valve of the
.
or
.
Inflation
♦
Switch on the display
"Display").
♦
Select the desired pressure (see section "Setting
the pressure").
♦
Remove the compressed air hose
storage compartment
♦
Plug in one of the supplied adapters
into the compressed air hose valve adapter
(see illustration).
♦
Connect the adapter
you want to inflate.
♦
Set the ON/OFF switch
The appliance starts.
♦
The compressor switches off automatically when
you reach the preset pressure.
♦
Pull the adapter
inflated item.
Adapters
Adapter
The Dunlop valve can be used for inflating bicycle
tyres.
Adapter
The ball needle can be used to inflate various balls.
Adapter
The universal adapter can be used to inflate air
mattresses or similar.
(see section
from the
.
,
,
or
to the object
to the position
,
or
out of the now
PKA 20-Li B2
or
.
