Idiomas disponibles
Idiomas disponibles
Switching on and off
Switching on the appliance (air pump)
♦
Set the ON/OFF switch
position
.
Switching on the appliance (compressor)
♦
Set the ON/OFF switch
position
.
♦
The appliance starts as soon as you switch on
the display
(see section "Display").
Switching on the LED work light
♦
Set the ON/OFF switch
The LED work light
NOTE
►
The compressor will not work if the display
is switched off.
Switching off the appliance
♦
Set the ON/OFF switch
Switching off the LED work light
♦
Set the ON/OFF switch
Display
♦
Press the ON/OFF button
the display
.
♦
After two seconds, the current pressure of the
connected item is shown.
NOTE
►
If the compressed air hose is not connected
to a suitable item, the display indicator
shows "0".
♦
You can switch between "bar", "psi" and "kpa"
on the display
by pressing the ON/OFF
button
.
NOTE
►
The display
(and also the compressor)
switches off after around three minutes of
inactivity.
►
The compressor will not work if the display
is switched off.
PKA 20-Li B2
to the
to the
to position "I".
7a
lights up.
7b
to the position
to position "O".
7a
to switch on
NOTE
►
The compressor switches off automatically
when the preset pressure has been reached.
♦
Press and hold the ON/OFF button
5 seconds to turn off the display
Setting the pressure
♦
Press the "+" button
set the desired pressure.
TIP
►
When you press and hold the "+" button
or the "-" button
pressure setting changes quickly.
Use
Inflation
♦
Remove the valve cap of the item you want
.
to inflate.
♦
Remove the blower hose
compartment
♦
Fit the connection of the blower hose
the air outlet
clockwise.
♦
Fit the appropriate adapter
the blower hose
♦
Push the adapter
the item.
♦
Switch the appliance on by moving the
ON/OFF switch
♦
Once the desired level of inflation has been
reached, switch off the appliance by moving
the ON/OFF switch
♦
Now remove the adapter
♦
Replace the valve cap on the item that you
have inflated.
.
or the "−" button
for a little longer, the
with blower hose
from the storage
.
. Screw it in tight by turning it
or
onto
.
or
into the valve of
to the position
to the position
or
.
GB │ IE
for
to
onto
.
.
│
9
■
