Idiomas disponibles
Idiomas disponibles
en - Before using for the first time
____________ °dH
The dishwasher is programmed at the
factory for a water hardness level of
2.5 mmol/l (14 °dH – German scale).
Set the water hardness level in your
area and confirm using OK.
Prompts will then appear in the display.
After confirming these prompts with
OK, the messages
Refill rinse aid
may appear.
Add salt and rinse aid if necessary
(see the "Dishwasher salt" and "Rinse
aid" sections in the "Before using for
the first time" chapter).
Select OK to confirm the messages.
The programme selected will appear
briefly in the display and the appropri-
ate sensor control will be illuminated.
Next, the estimated water consumption
may be shown for the chosen pro-
gramme for several seconds.
Then the display will show the estim-
ated running time for the programme
selected.
Opening the door
In some programmes, the door auto-
matically opens slightly to assist the
drying process.
This function can be deactivated if you
wish.
40
Refill salt
and
To open the door, reach under the re-
cessed grip and pull the handle.
Open the door fully to disengage the
locking mechanism.
At the end of the programme, if the
AutoOpen function is on, the door lock-
ing pins automatically retract.
To prevent a technical fault, do not
hold the door locking pins firmly
when they are retracting.
If the door is opened during operation
all wash functions are automatically in-
terrupted.
