Idiomas disponibles
Idiomas disponibles
en - Warning and Safety instructions
There must be no electrical sockets behind the dishwasher.
Danger of overheating and fire risk if the dishwasher were to be
pushed up against a plug. See "Electrical connection".
Do not connect the dishwasher to the mains electricity supply via
a multi-socket unit or an extension lead. These do not guarantee the
required safety of the appliance (e.g. danger of overheating).
Never open the casing of the dishwasher. Any contact with live
connections or tampering with the electrical or mechanical compon-
ents of the dishwasher will endanger your safety and may lead to ap-
pliance malfunctions.
The dishwasher must not be used if the electrical connection
cable is damaged. A damaged connection cable may only be re-
placed by a suitable connection cable of the same type. For safety
reasons, such replacement may only be carried out by the Miele
Customer Service Department or a qualified service technician.
The dishwasher must be disconnected from the mains electricity
supply before any maintenance or repair work is carried out.
The plastic housing of the water connection contains electrical
components. It must not be dipped in water.
There are electrical wires in the water inlet hose. Do not shorten
the water inlet hose, even if it is too long.
The integrated Waterproof system offers protection from water
damage, provided that the following conditions are met:
- Installation has been carried out correctly.
- The dishwasher is properly maintained and parts are replaced
where it can be seen that this is necessary.
- The stopcocks have been turned off during longer periods of in-
activity (e.g. whilst on holiday).
34
