Tabla de contenido
Idiomas disponibles
Idiomas disponibles
2. MEASURE INSTALLATION
Dimensions for the most common installation are shown at right.
The minimum hood distance above cooktop must not be less than 24''. A
maximum of 36" above cooktop is highly recommended for best capture of
cooking impurities.
Distances over 36" are at the installer and users discretion.
3. PREPARE THE INSTALLATION
When performing installation, servicing or cleaning the unit, it is recommended to wear safety glasses and gloves.
NOTE: Before proceeding to the installation, check the contents of the box. If items are missing or damaged, contact the manufacturer.
Remove the installation kit from inside the hood.
Make sure that the following items are included:
- Wood strip (screwed on back of hood)
- Installation manual
- Accessories including:
• Hybrid baffle filters with handles (3 for 30" and 36" width, 4 for 42" width, 5 for 48" and 54" width, 6 for 60" width)
• Shielded halogen bulbs (GU10 type base, 120 V, 50 W) (4 for hoods up to 42" width, 6 for hoods from 48" to 60" width)
• Bag of parts including:
4 no. 10-2" flat head screws, 8 no. 8 x 3/4" screws, 4 no. 10-32 nuts, 2 wall anchors, 2 washers 3/16" ID x 3/4" OD
Parts sold separately:
- Interior blower model iQ6, P3 or P6 (includes rough-in kit and 8" round adapter and damper), for either ducted or non-ducted installation.
- Interior blower model iQ12 or P12 (includes rough-in kit and 10" round vertical in-line damper, model 421), for ducted installation only.
- In-line blower assembly model ILB3, ILB6, ILB9 or ILB11 (all include transition(s) and rough-in plate), for ducted installation only.
- Exterior blower assembly model EB6, EB9, EB12 or EB15 (all include rough-in plate), for ducted installation only.
- Duct, elbows, dampers, wall and roof caps. Refer to pages 3 and 4 for a complete list of venting options and model numbers.
- Non-duct kit ANKWP Series, mandatory for non-ducted installation.
- Optional decorative flue AEWP Series, for ducted installation only.
Cabinet, soffit,
decorative flue or
non-duct kit flue
HH0204A
WARNING
!
6
A
Hood
Minimum distance between
the hood and cooktop: 24''
Recommended maximum
distance between the hood
and cooktop: 36''
Standard 36"
high cooktop
MINIMUM AND MAXIMUM DISTANCE
OVER COOKTOP
Ceiling
Top of wood
mounting strip
A + 0.25''
Tabla de contenido
