Tabla de contenido
Idiomas disponibles
Idiomas disponibles
2. MEASURE INSTALLATION
Dimensions for the most common installation are shown at right.
The minimum hood distance above cooktop must not be less than 30''. A maximum of 36"
above cooktop is highly recommended for best capture of cooking impurities.
Distances over 36" are at the installer and users discretion.
Since framework must be flush to ceiling, 4 decorative flue covers have been created to fit both
hood widths and different ceiling heights. Refer to table below to choose the model that fits your
needs.
D
F
C
ECORATIVE
LUE
OVER
M
A (H
)
ODEL
EIGHT
AEIP422
12"
AEIP542
12"
AEIP428
18"
AEIP548
18"
AEIP424
24"
AEIP544
24"
AEIP420
30"
AEIP540
30"
NOTE: For ceilings over 9' , decorative flues are not available.
If a drywall box will be built instead of installing decorative flue cover, use drywall trim to hide hood and drywall junction. Refer to table
below to find the appropriate model for your hood width.
3. PREPARE THE INSTALLATION
When performing installation, servicing or cleaning the unit, it is recommended to wear safety glasses and gloves.
NOTE: Before proceeding to the installation, check the contents of the box. If items are missing or damaged, contact the manufacturer.
Remove the installation kit from inside the hood.
Make sure that the following items are included:
- Installation manual
- Accessories including:
• Hybrid baffle filters with handles (3 for 42" width hood, 5 for 54" width hood)
• Shielded halogen bulbs (GU10 type base, 120 V, 50 W) (6 for 42" width hood, 8 for 54" width hood)
• Bag of parts including:
(10) steel wood screws no. 10 x 1.5'' , (10) steel washer no. 10, (6) screws no. 8 x 3/8'' (additional screws provided)
Parts sold separately:
- Interior blower model iQ6, P3 or P6 (includes rough-in plate and 8" round adapter and damper).
- Interior blower model iQ12 or P12 (includes rough-in plate and 10" round vertical in-line damper, model 421).
- In-line blower assembly model ILB3, ILB6, ILB9 or ILB11 (all include transition(s) and rough-in plate)
- Exterior blower assembly model EB6, EB9, EB12 or EB15 (all include rough-in plate).
- Duct, elbows, dampers, wall and roof caps. Refer to pages 3 and 4 for a complete list of venting options and model numbers.
- Optional decorative flue cover AEIP Series, 12'' , 18" , 24" or 30" height and 42" or 54" width.
- Optional dry wall trim ATDIP Series, 42" or 54" width.
L
L
® E
H
INK
OGIC
NABLED
OOD
This hood includes the LinkLogic system which allows communication over ordinary household electrical wiring to other LinkLogic devices
including the Broan Smart Sense Fan system. If you intend to use this hood with another LinkLogic device, follow the instructions found in
Section 21 along with the instructions that come with the LinkLogic device you plan to use.
8'
CEILING
DISTANCE FROM COOKTOP
W
30"
IDTH
42"
54"
42"
X
54"
X
42"
54"
42"
54"
9'
CEILING
DISTANCE FROM COOKTOP
36"
30"
X
X
X
X
M
W
ODEL
IDTH
ATDIP42
42"
ATDIP54
54"
WARNING
!
6
Framework
flush to ceiling
Decorative flue
cover or drywall
with trim
Minimum distance between
the hood and cooktop:
36"
Recommended maximum
distance between the hood
and cooktop: 36'' (914 mm)
X
X
HH0084A
MINIMUM AND MAXIMUM DISTANCE
OVER COOKTOP
A
30'' (762 mm)
Standard 36"
(914 mm)
high cooktop
Tabla de contenido
