Idiomas disponibles
Idiomas disponibles
OPERATION
Do not force the tool and use a slow speed setting.
Use cutting oil when cutting soft metals and steel. Cutting
oil also keeps the blades cool, increases cutting action,
and prolongs blade life.
Clamp the workpiece firmly and cut close to the clamping
point to eliminate any vibration of the work. When cutting
MAINTENANCE
WARNING:
When servicing, use only identical replacement
parts. Use of any other part could create a hazard
or cause product damage.
AFTER FRENCH AND SPANISH LANGUAGE SECTIONS.
This product has a 90-Day Satisfaction Guarantee Policy,
For Warranty and Policy details, please go to www.RIDGID.com
NOTE: ILLUSTRATIONS START ON PAGE 8
as well as a Three-year Limited Warranty.
or call (toll free) 1-866-539-1710.
conduit pipe or angle iron, clamp the workpiece in a vise if
possible and cut close to the vise. To cut thin sheet material,
"sandwich" the material between hardboard or plywood and
clamp the layers to eliminate vibration and material tearing.
Always keep firm pressure on the shoe assembly to hold
it securely against the workpiece.
GENERAL MAINTENANCE
Avoid using solvents when cleaning plastic parts. Most
plastics are susceptible to damage from various types of
commercial solvents and can be damaged by their use. Use
clean cloths to remove dirt, dust, oil, grease, etc.
7 — English
