Idiomas disponibles
Idiomas disponibles
ECO Operation
Energy saving function,
Press the "ECO" button to turn this function on. Indoor unit goes
into ECO mode.
Under ECO mode, press the ECO or Mode or Turbo button, or
change setting temperature below 24 °C to exit ECO mode.
Auto-Clean
Turbo
Mode
My Temp
ECO
Temp+
installing the batteries
1. Remove the batteries compartment cover.
2. Insert two "AAA" batteries as illustrated noting battery polarity.
3. Replace the batteries compartment cover.
3
Notes:
• The distance from the remote control to the receiver should be
less than 7 meters with no obstructions.
• If the remote control display is weak or the operating distance has
diminished, the batteries may need to be
replaced.
• Remote control malfunctions can sometimes be corrected by re-
moving the batteries from the remote for a few minutes and then
reinstalling them.
• Remove the batteries from the remote control if the unit will not
be in use for an extended period of time.
• If any segments of the display remain active after battery removal,
press the reset button.
When ECO function (on
some models) is activated.
Digits are gradually
illuminated one by one in
the following order:
three seconds interval.
2
1
set
temperature
57
