Idiomas disponibles
Idiomas disponibles
air flow direction adjustment
vertical air flow
Each time the
non
button is pressed, the remote control will display
as follows:
COOL/DRY:
HEAT:
SELF-CLEAN Operation
1.Functional description:
the purpose of this function is to clean the evaporator.
2.
：
AUTO CLEAN
exit, please press the
"power" button or swift to other mode to exit.
Note:
1.
This function is invalid in timer / sleep mode.
2.
After this mode starts, the air volume may reduce or even
have no airflow,or even cold airflow blowing.
3.
It is normal if the unit make some sound like expand with
heat and contract with cold.
4.
The "CL" display time may last differently on the remote
controller and panel.
5.
If the outside ambient temperature below zero, error code
"F25 "may be occurred during self-cleaning operation , which
is normal protection, please turn off the power
and to restart after 10 seconds .
6.
The best condition to run this mode: the temperature is 20℃
~27℃ and the humidity is 35％~ 6 0％ in the door,
the temperature is 25℃~ 3 8℃（cooling season）out the door.
7.
It is hard to frost if the air is too dry(humidity＜20%). and if
the humidity is too high(humidity＞70%).the condensate
water may increase, which may move away some frost.
53
