Idiomas disponibles
Idiomas disponibles
08
The Initial Settings Menu
Manual: Use the Joystick to move the cursor
up/down to select a speaker.
Initial Settings
Digital Audio Out
Video Output
Language
Display
Options
Speakers
i.LINK Setup
Move the cursor right (or press ENTER) then
use the Joystick (up/down) to set the channel
output level.
Initial Settings
Digital Audio Out
Video Output
Language
Display
Options
Speakers
i.LINK Setup
To turn the test tone on/off for an individual
speaker, move the cursor right. The test tone
continues playing even when you select a
different speaker.
Initial Settings
Digital Audio Out
Video Output
Language
Display
Options
Speakers
i.LINK Setup
To save the settings and exit, press ENTER
with the channel level field highlighted (as
shown above).
70
En
Auto
0.0dB
L
0.0dB
C
0.0dB
R
RS
0.0dB
0.0dB
LS
0.0dB
SW
Auto
0.0dB
L
C
0.0dB
R
0.0dB
0.0dB
RS
0.0dB
LS
0.0dB
SW
Auto
0.0dB
L
C
0.0dB
0.0dB
R
0.0dB
RS
0.0dB
LS
0.0dB
SW
i.LINK Setup
Audio Out
• Default setting: On
You only need to make this setting if you
connected this player to other equipment
using the i.LINK interface.
Initial Settings
Digital Audio Out
Audio Out
Video Output
Connections Setup
Language
Auto Select Play
Display
Options
Speakers
i.LINK Setup
Change this setting to Off if the i.LINK
interface is still connected but you need to
use one of the other outputs. Changing this
setting to Off does not affect i.LINK thru
data (ie., if this player is between two other
i.LINK components, it will still pass data
between them).
Set back to On (i.LINK-ready) to be able to
use the i.LINK interface.
On
Off
