Pioneer DV-757Ai Manual De Instrucciones página 53

Idiomas disponibles

Idiomas disponibles

The Audio Settings Menu
4
Variable setting only: Set the channel
levels for each speaker.
Audio Settings
Channel Level L
Channel Level C
Channel Level R
Channel Level RS
Channel Level LS
Channel Level SW
• Use the Joystick (up/down) to select a
speaker.
• Use the Joystick (left/right) to adjust the
channel level for that speaker.
Channel levels can be set from –6 dB to
+6 dB. in 0.5 dB increments.
5
Press ENTER to make the settings and
exit the audio settings screen.
• You can't adjust the channel level for
any speakers that are set to Off in the
Speaker Installation menu screen
(pages 67–68).
• The Fix setting is equivalent to setting
all the channel levels to +6 dB. There-
fore, the Variable setting will usually
sound quieter than the Fix setting.
Speaker Distance
• Default setting: all speakers 3 m
To get the best surround sound from your
system, you should set up the speaker
distances from your listening position.
1
Press SETUP and select 'Audio
Settings' from the on-screen display.
2/ 3
0.0 dB
0.0 dB
0.0 dB
0.0 dB
0.0 dB
0.0 dB
2
Move the cursor down until you reach
the Speaker Distance setting screen.
Audio Settings
Speaker Distance L
Speaker Distance C
Speaker Distance R
Speaker Distance RS
Speaker Distance LS
Speaker Distance SW
• Use the joystick (up/down) to select a
speaker.
• Use the joystick (left/right) to adjust the
distance from your listening position to
that speaker.
Front left/right (L/R) speaker distances can
be set from 30 cm to 9 m in
10 cm. increments.
The center speaker (C) and subwoofer (SW)
can be set from –2 m to +2 m relative to the
front left/right speakers.
Surround left/right (LS/RS) speakers can be
set from –6 m to +2 m relative to the front
left/right speakers.
When you adjust the front left (L) or front
right (R) speaker, all the other speaker
distances are adjusted relative to that
speaker.
3
Press ENTER to make the settings and
exit the audio settings screen.
• The speaker distance settings have no
effect on SACD playback. The channel
level settings, however, do apply.
2/ 2
3m
3m
3m
3m
3m
3m
06
53
En
loading