Idiomas disponibles
Idiomas disponibles
being run up gradually with no jerks and kickbacks; no
jump-like load is imposed on the motor upon switching.
4. HOW TO CHARGE THE BATTERY
Battery charging time
Initial operating of the power tool
Before the first use, the battery 7 (Fig. 1) must be
fully charged.
Charging process (Fig. 2)
• Press the battery lock 4 and remove the battery 7
(Fig. 1).
• Connect the charger 19 to the power supply.
• Insert battery 7 into charger 19 (Fig. 2).
• Disconnect the charger 19 from power supply after
charging.
• Remove the battery 7 from the charger 19 and mount
battery 7 in the power tool.
Charger indicators (Fig. 3)
Charger indicators 21 and 22 inform of the battery 7
(Fig. 1) charging process. Signals of the indicators 21
and 22 are shown on the label 20. (Fig. 3).
• Fig. 40.1 - (The green indicator 22 is on, the battery
7 is not inserted in the charger 19) - the charger 19 is
connected to the power network (ready for charging).
• Fig. 40.2 - (The green indicator 22 is blinking, the
battery 7 is inserted in the charger 19) - the battery 7
is being charged.
• Fig. 40.3 - (The green indicator 22 is on, the battery
7 is inserted in the charger 19) - the battery 7 is fully
charged.
• Fig. 40.4 - (The red indicator 21 is on, the battery
7 is inserted in the charger 19) - the charging process
of the battery 7 is terminated due to inappropriate
temperature. When the temperature conditions are
normal, the process of charging will resume.
• Fig. 40.5 - (The red indicator 21 is blinking, the battery
7 is inserted in the charger 19) - the charging process
of the battery 7 is terminated because of its failure.
Replace the faulty battery 7, its further use is prohibited.
In the process of charging the battery 7 and the charger
19 become hot, it is a normal process.
5. STARTING UP THE MACHINE
To start up the machine, push button forward to the
on position.
To stop the machine, simply press the back of the switch
and it will return to the off position.
6. NOISE LEVEL AND VIBRATIONS
The noise and vibration levels of this device have
been measured in accordance with European stan-
dard EN 60745-2-19 and EN 60745-1 and serve as a
basis for comparison with other machines with similar
applications.
The indicated vibration level has been determined
for the device's main applications and may be used
as an initial value for evaluating the risk presented by
exposure to vibrations. However, vibrations may reach
levels that are quite different from the declared value
under other application conditions, with other tools or
with insufficient maintenance of the electrical device
or its accessories, reaching a much higher value as a
result of the work cycle or the manner in which the
electrical device is used.
Therefore, it is necessary to establish safety measures
to protect the user from the effects of vibrations, such
as maintaining both the device and its tools in perfect
condition and organising the duration of work cycles
(such as operating times when the machine is subjected
to loads, and operating times when working with no-load,
in effect, not in use, as reducing the latter may have a
considerable effect upon the overall exposure value).
7. WARRANTY
All VIRUTEX power tools are guaranteed for 12 months
from the date of purchase, excluding any damage which
is a result of incorrect use or of natural and tear on the
machine. All repairs should be carried out by the official
VIRUTEX technical assistance service.
8. RECYCLING ELECTRICAL EQUIPMENT
Never dispose of electrical equipment with domestic
waste. Recycle equipment, accessories and packaging
in ways that minimise any adverse effect on the envi-
ronment. Comply with the current regulations in your
country.
Applicable in the European Union and in European
countries with selective waste collection systems:
If this symbol appears on the product or in the accom-
panying information, at the end of the product's useful
life it must not be disposed of with other domestic waste.
In accordance with European Directive 2002/96/EC,
users may contact the establishment where they pur-
chased the product or the relevant local authority to
find out where and how they can take the product for
environmentally friendly and safe recycling.
VIRUTEX reserves the right to modify its products
without prior notice.
11
