KBS Keenbot T8 Manual De Instrucciones página 32

30 | Keenon Robotics Boosting the New Revolution of Intelligent Unmanned Delivery
6. Troubleshooting
In case of any problems, please refer to the solutions below.
Problem
Unable to power on
the robot
The robot does not
move
The navigation does
not work
The robot makes no
voice or sound
The robot does not
work normally
|
① When the battery is low, charge the robot with
the power adapter.
② If the problem persists, please contact customer
support.
① Press the stop button, manually move the label
to an easily visible place, release the stop button,
and then check if the robot moves again.
② If the problem persists after operation ①, turn
off the main power switch, turn it on when the
robot is in a place where the label is easily visible
to the robot and try again.
③ If the problem persists, please contact customer
support.
① If the robot is off the map, turn off the main
power switch, move the robot near the starting
point, and restart the navigation.
② Make sure the display module is not covered by
cloth or other objects. Remove dust, if any.
① If there is no voice or sound, or the volume is
too low, adjust the volume.
② If the problem persists, please contact customer
support.
Turn off the main power switch and contact customer
support.
Solution