De Dietrich DHV2963B Montaje Y Modo De Empleo página 71

Idiomas disponibles
  • ES

Idiomas disponibles

  • ESPAÑOL, página 77
Warnings
The minimum distance between the supporting surface for the cooking equipment
on the hob and the lowest part of the range hood must be not less than 55cm from
electric cookers and 65cm from gas or mixed cookers.
If the instructions for installation for the gas hob specify a greater distance, this
must be adhered to.
Electrical connection
The mains power supply must correspond to the rating indicated on the plate si-
tuated inside the hood. If provided with a plug connect the hood to a socket in com-
pliance with current regulations and positioned in an accessible area, after installa-
tion. If it not fitted with a plug (direct mains connection) or if the plug is not located
in an accessible area, after installation, apply a double pole switch in accordance
with standards which assures the complete disconnection of the mains under condi -
tions relating to over-current category III, in accordance with installation instructions.
Warning! Before re-connecting the hood circuit to the mains supply and checking the
efficient function, always check that the mains cable is correctly assembled.
The hood is provided with a special power cable; if the supply cord is damaged, it
must be replaced by the manufacturer, its service agent or similarly qualified persons
in order to avoid a hazard.
Mounting
Expansion wall plugs are provided to secure the hood to most types of walls/ceilings.
However, a qualified technician must verify suitability of the materials in accordan -
ce with the type of wall/ceiling. The wall/ceiling must be strong enough to take the
weight of the hood. Do not tile, grout or silicone this appliance to the wall. Surface
mounting only.
71
loading