Idiomas disponibles
Idiomas disponibles
Activating automatic heating (or "heat-up"
function)
Press and hold an area of the cursor for the cooking area that is
working for about 3 seconds until you hear a beep (such as 1/3 of
the length of the cursor area).
For example: Select level 3 and activate the automatic heating
function by pressing your finger for 3 seconds. The corresponding
display shows the letter "A" alternating with "3". With these settings,
the cooking surface heats the cooking area at the maximum level
"9" for 2 minutes and then continues cooking level at level "3".
Duration Automatic
Power
Heating Function (time
Level
in minutes)
0
-
1
0' 40"
2
1' 12"
3
2'
4
2' 56"
5
4' 16"
6
7' 12"
7
2'
8
3' 12"
9
-
P
-
Extension function (For large pans)
This function facilitates cooking with large rectangular pans, is
only available for the rectangular cooking areas and is activated
by simultaneously pressing the 2 cursors of the 2 cooking areas
involved. At this point, a "U" icon will light up next to the display
of the levels (1-9) and the cooking area can now be controlled
from only once cursor since the other will work simultaneously at
the same level.
Special functions
By turning on the touch display, you can program a special function
by pressing the button indicating the position of the cooking area
(button 8).
This function is present for each cooking zone and is able to
maintain the temperature of the pan (about 40°), previously
heated. It is displayed by the dedicated icon (16) together with the
symbol
together with the symbol that will appear on the display
(14), flashing alternately with the no pot symbol
These temperatures are approximate and are greatly dependent
on the pot and the quantity of food.
Maximum Duration of
Working Time without
Commands (time in
minutes)
516
402
318
258
210
138
138
108
90
10
.
Control lock (child safety)
It is only activated when the cooking surface is on but no cooking
area is on.
Simultaneously press the key button (5) and the pause button (6)
and then press the key button (5).
The letter "L" will appear on both displays for 10 seconds and then
they will turn off.
When you try to turn on the cooking surface with the On/Off button
(1), the letters "L" will be displayed and it will not be possible to
cook.
Unlocking/deactivation child safety
There are two types of unlocking:
1) Unlocking for one time only: To disable the function, turn on
the cooking surface and simultaneously press the pause (6)
and key (5) buttons. The letters L disappear and are replaced
by a "0" for each cooking area. If you turn off the cooking
surface after use, when it is turned on again, the letters L will be
displayed to indicate that the surface is locked.
2) Permanent unlocking: To disable the function permanently, turn
on the cooking surface and simultaneously press the pause (6)
and key (5) buttons. Then release these 2 buttons and press the
Pause button (6) again.
Key
This cooking surface allows setting a keypad lock using the lock
button (5). It may be useful to lock the keypad during operation, for
example for cleaning the control area or, in any case, if you do not
want to change any settings.
The On/Off button (1) still has priority.
Pause
This cooking surface allows setting a pause (6) during cooking
(which is useful, for example, when answering a phone call). When
this function is pressed, an LED lights above the button and the
symbol "II" is displayed in all the cooking areas and the cooking
settings and timers are frozen for a maximum of 10 minutes, after
which the cooking surface turns off.
Deactivating Pause
Once activated, the function can be deactivated by pressing
the pause button (6) again. The LED for the pause setting turns
off and, within 10 seconds, you must slide your finger along the
cursor below the illuminated area (from left to right). This allows the
surface to resume cooking and the timer starts from the same point
at which it was stopped.
EN
7
