DeWalt DC305 Manual De Instrucciones página 11

Storage Recommendations
1. The best storage place is one that is cool and dry away from direct
sunlight and excess heat or cold.
2. For long storage, it is recommended to store a fully charged
battery pack in a cool dry place out of the charger for optimal
results.
NOTE: Battery packs should not be stored completely depleted of
charge. The battery pack will need to be recharged before use.
SAVE THESE INSTRUCTIONS
FOR FUTURE USE
COMPONENTS (FIG. 2)
WARNING: Never modify the power tool or any part of it. Damage
or personal injury could result.
A. Lock-off button
B. Trigger switch
C. Blade clamp release lever
D. Shoe
FIG. 2
A
B
F
G
E. Hand grip
F. Battery release button
G. Battery pack
E
C
D
Variable Speed Trigger Switch (Fig. 3)
LOCK-OFF BUTTON AND TRIGGER SWITCH
Your saw is equipped with a
lock-off button (A).
To lock the trigger switch,
press the lock-off button as
shown in Figure 3. Always
lock the trigger switch (A)
when carrying or storing the
tool to eliminate unintentional
starting. The lock-off button
is colored red to indicate
when the switch is in its
unlocked position.
To unlock the trigger
switch, press the lock-off
button as shown in Figure 3. Pull the trigger switch to turn the motor
ON. Releasing the trigger switch turns the motor OFF.
NOTE: This tool has no provision to lock the switch in the ON position,
and should never be locked ON by any other means.
The variable speed trigger switch will give you added versatility. The
further the trigger is depressed the higher the speed of the saw.
WARNING: This tool has no provision to lock the switch in the ON
position, and should never be locked ON by any other means.
CAUTION: Use of very slow speed is recommended only for
beginning a cut. Prolonged use at very slow speed may damage your
saw.
9
FIG. 3 UNLOCKED
LOCKED