WIFI GUIDE
The air conditioner must be in constant connection with a wireless router or access point connected to the internet.
Mobile devices such as smartphones and tablets, on which dedicated applications are installed and the Wi-Fi modules
subsequently configured, can be used as remote controls once connected to the internet.
How to set up and operate the air conditioner with Wifi
1. Make sure that the device (smartphone or Tablet) used is equipped with a standard version of Android (version 4.4
or higher) and iOS (iOS7.0 or higher) as the operating system. For more details refer to the App.
2. Units can be connected and controlled only via Wi-Fi network or via Hotspot function.
3. Routers with WEP encryption are not supported.
4. The application interface is universal for all products and many features may not match for all units. It may vary
depending on the operating system used or the update in use. Refer to the current version.
5. If the access protection on your Router is active in the "MAC Filter" / "MAC address filter" item, enable the access
to the network of the MAC address of the device.
Installation and use instruction
1. Frame the QR Code using a
or search for the "EWPE SMART" application in the app store
download and install the application.
Install the App by referring to its guide. Once the installation is complete, the icon
smartphone's home page.
NB:
Before starting any procedure, disconnect the power supply from the product, allow a few
minutes to pass and reconnect it.
2. Registration and access
After installing the application, open "EWPE SMART" and click Sign up to register.
PLEASE NOTE:
• USERNAME: must be UNIQUE, composed of name + number, without spaces (eg Rossi57)
• Personal email: if already registered, retrieve Username / Password. It is not possible to create another account
with the same mail.
• PASSWORD: must have at least one capital letter, symbols or special characters (- ;, etc.) and numbers.
• Repeat PASSWORD written above
• EUROPE country
QR Code Reader
79
appears on the