Argo X3I ECO PLUS 27 HL WF Manual De Instalacion Y Uso página 75

then adjust its operation automatically based on the difference between the detected temperature and the set
temperature.
Press the button again to exit the I FEEL function. The
The remote control should be positioned near the user when this function is selected. The remote control should
not be placed anywhere high or low temperatures may occur to avoid inaccurate ambient temperature detection.
Place the remote control near the user when this function is set. Do not place the remote control near high or low
temperature objects to avoid an inaccurate ambient temperature. Position the remote control where the indoor
unit can receive the remote control signal.
TIMER ON / TIMER OFF button
SETTING TIMER ON
This function allows you to program the air conditioner to turn on. When you press this button, the
disappear from the display and the word "ON" will flash on the remote control display. Press "▲" or "▼" to
adjust the TIMER ON setting.
Press and hold "▲" or "▼" for 2 seconds to rapidly change the time until you reach the desired value. Press
TIMER ON to confirm. The word "ON" will stop flashing. The
CANCELLING TIMER ON
If the TIMER ON function is enabled, press the TIMER ON button to cancel the setting.
SETTING TIMER OFF
This function allows you to program the air conditioner to turn off. When you press this button, the
disappear from the display and the word "OFF" will flash on the remote control display. Press "▲" or "▼" to
adjust the TIMER OFF setting. Press and hold "▲" or "▼" for 2 seconds to rapidly change the time until you
reach the desired value. Press "TIMER OFF". The word "OFF" will stop flashing. The
the display.
CANCELLING TIMER OFF
If the TIMER OFF function is enabled, press the TIMER OFF button to cancel the setting.
N.B.:
• You can set the TIMER ON and TIMER OFF function in OFF and ON mode.
• Before you set the TIMER ON or TIMER OFF function, set the clock.
• When the TIMER ON or TIMER OFF function is enabled, the air conditioner will turn on or off according to the
set time. Turning the air conditioner ON/OFF will not affect the setting.
CLOCK button
Press this button to set the clock. The
seconds to set the clock. Each time you press "▲" or "▼", the clock will increase or decrease by 1 minute. Press
and hold "▲" or "▼" for 2 seconds to rapidly change the time. Release the button when you reach the desired
time. Press "CLOCK" to confirm the time. The
N.B.:
• The time displays in the 24-hour clock format.
• If no adjustment is made for 5 seconds the remote control will exit the setting mode. This also applies to the TIMER
ON/OFF function.
QUIET button
1. When the Quiet function is selected, the symbol will appear on the display
2. In cooling mode the internal fan works with 4 steps of speed; 10 minutes later or when the indoor temperature
is ≤28°C, the internal fan will operate at step 2 or in quiet mode, ie in accordance with a comparison between
the internal temperature of the environment and the set temperature.
3. In heating mode the internal fan operates with step 3 of speed or in quiet mode, ie in accordance with a
comparison between the internal temperature of the room and the set temperature.
4. In the dehumidification and ventilation mode the internal fan operates in quiet mode.
icon will disappear from the display.
icon will flash on the remote control display. Press "▲" or "▼" within 5
icon will stop flashing.
75
icon will re-appear on the display.
icon will re-appear on
.
icon will
icon will