Regalo 1350 Manual De Instrucciones página 4

STEP 4
Position the play yard into your desired
configuration (e.g. octagon, square), then
join the free ends of the play yard together at
the plastic joints.
STEP 7
Assembly is now complete.
NOTE:
When adding or removing
additional panel units to the configuration,
panels must be added or subtracted in
sets of two for the freestanding enclosure
to function properly.
STEP 5
Place the tube with the hinge knob on it into the
hole in the bottom of the extension gate. Stand
tube vertically and connect hinge knob to top.
Gate Operation
STEP 1
UNLOCKED
To open the gate, start with rotating the base lock
in the upward direction. Do this on both sides of
the door.
NOTE:
You can rotate the base lock in either
direction.
STEP 6
Slide the tube into place and screw the hinge
knob in the counter clockwise direction to
tighten.
STEP 2
LOCKED
Press the release button down on the handle.
Slide the handle back towards the hinge.
NOTE:
When closing the gate you must do
the same operation.