Regalo 1350 Manual De Instrucciones página 3

Option A: Installing Your Gate Between Two Walls
STEP 1
Loosen the hinge knob in the clockwise
direction. Doing this will let allow the gate to
unfold.
Option B: Installing Your Gate as a Play Yard
STEP 1
Completely remove
hinge knob
Twist the hinge knobs in clockwise direction to
loosen.
STEP 2
Use a Phillips/crosshead screwdriver (C) to fix
the wall mounting bracket (B) to the wall.
Repeat for all four brackets.
STEP 2
Loosen all other
hinge knob(s)
Removing the Wall Mount: Panel 1
Loosen the hinge knob in the clockwise
direction to disengage the locking teeth. Slide
the hinge knob and the toothed hinge cover cap
downward. Pull the tube along with the hinge
knob, toothed hinge cover cap, and wall mounts
away from the gate to release all the parts.
Remove the male hinge cover cap from the
bottom.
STEP 3
51.5" Minimum Width
Arrange the panels to your desired configuration,
then tighten all of the hinge knobs.
NOTE:
This gate is designed to fit openings
51.5 inches (130.81 cm) to 194 inches
(492.76).
STEP 3
Removing the Wall Mount: Panel 2
Loosen the hinge knob in the clockwise
direction to disengage the locking teeth.
Slide the hinge knob and the toothed hinge
cap downward. Pull the tube along with the
hinge knob, toothed hinge cap, and wall
mounts away from the gate to release all
the parts. Remove the female hinge cover
cap from the bottom.
28"