Idiomas disponibles
Idiomas disponibles
1. Stop the product. Refer to
page 12 .
2. Put a container below the water extraction hose (A)
to collect the water.
Introduction
WARNING:
safety chapter before you do maintenance
on the product.
Maintenance schedule
* = General maintenance done by the operator. The
instructions are not given in this operator's manual.
General product
maintenance
Make sure that the
power plug and ex-
tension cable are in
good condition and
not damaged.
Do a check of
the electrical compo-
nents, the cables and
the connections for
wear and damages.
Examine the electric
motor for dirt and
damage.
Empty the drain box.
Make sure that the
dust extraction hose
is not damaged or
blocked.
Drain the water from
the pressure tank.
16
To stop the product on
A
B
Maintenance
Read and understand the
Weekly
Daily
*
*
*
*
*
X
3. Open the water valve (B).
4. Close the water valve when all the water is drained.
X = The instructions are given in this operator's manual.
O = The instructions are not given in this operator's
manual. Let an approved service agent do the
maintenance.
After 200 h of operat-
ing time
12 h after
Each 3
servicing
months
2061 - 001 - 13.02.2023
Yearly
