Idiomas disponibles
Idiomas disponibles
The generator produces enough power to cause
electric shock capable of causing damage and injury
to the user in case of misuse.
Do not run the generator or power tools in wet
environments, such as rain or snow, near swimming
pools or watering systems, with wet hands. These actions
could result in electrocution. Keep the generator dry.
If the generator is stored outside without any protection
against
weather
conditions,
components on the control panel before each use. Moisture
or frost can cause malfunctions and short circuits in the
electrical components that may result in electrocution.
Protection against electric shock depends on the circuit
breaker installed in the generator's control panel. If the
circuit breaker needs to be replaced, contact the distributor
to replace the circuit breaker with one having the same
characteristics.
Use only insulated extension cords with electrical cables
with a suitable cross-section for the power of the
equipment. If using 1.5 mm2 cables, the length of the
extension cord must not exceed 60m, if 2.5 mm2, it must
not exceed 100m.
Carry the generator only when the combustion engine is not
running. Before moving it, turn off the engine and remove
the cap from the spark plug.
Always carry the generator when the engine is cold and
without fuel on the tank.
When transporting the appliance, regional legislation in
force must be respected, in particular that concerning
cargo protection and object transport on loading surfaces.
Make sure that the appliance is only used by people who
are familiar with the instruction manual.
Check the leak tightness of the fuel system,
particularly visible parts such as tank, tank cap and
couplings. In the event of leakage or damage, do not start
.
the combustion engine
check
all
electrical
Have the inverter generator repaired by an official
distributor.
Before operating the appliance, replace damaged and
worn-out parts.
Check that all nuts and bolts are properly tightened. It is
important to inspect regularly the equipment in order to
ensure safety issues and a good performance from the
generator.
Before operating the generator, check if the cap is properly
connected to the spark plug.
Make all adjustments and work necessary for the correct
assembly of the generator. If you have any questions or
difficulties, contact your official dealer.
To ensure that you run the appliance safely, you should
consider a few precautions and procedures before start-up:
▪ The generator is correctly assembled;
▪ The safety devices are in perfect condition and function
properly. Never operate the inverter generator if the
safety devices are missing, inhibited, damaged or worn
out;
▪ The fuel tank, fuel injection components and tank cap
are in perfect condition.
Observe the local regulations on the hours when it is
allowed to use tools with a combustion engine and the
permitted noise level.
Keep third parties away from the inverter generator's
area of operation. Never work while animals or people,
especially children, are in the danger zone.
The exhaust system reaches high temperatures that can
ignite some materials. Keep flammable materials away
from the appliance.
Keep the inverter generator at least 1 m away from
structures,
buildings
operation. Do not attach the generator to any structure.
Operate the generator with special care near slopes,
ditches and wells. Place the appliance on a firm, level floor
at a safe enough distance from these danger zones.
and
other
equipment
during
