Idiomas disponibles
Idiomas disponibles
23 Check that the vane switch is functional.
▷ If the vane is moved a little in the direction of the
arrow, a quiet click can be heard. This means
that the switching path is correct.
Assembly
24
25
24
25
24
25
▷ The connector with conical sealing surfaces must
27
28
be screwed tight. Otherwise, gas can escape.
27
28
27
28
30
31
▷ Ensure that the rubber seals between the elec-
30
31
trodes and the terminal boots are fitted correctly.
30
31
32 Check the safety functions before commission-
ing, see page 20 (Checking the safety func-
tions and burner operation).
Number of operating cycles
2 Check the number of operating cycles (heater ON):
the number of operating cycles can be displayed
by pressing and holding the RESET button. The
number of operating cycles is composed as fol-
lows in alternating displays:
The first character (X.) stands for X,000,000 op-
erating cycles, the second character (Y) stands
for Y00,000 operating cycles. For example, the
first character is the number 2.: the unit has ex-
ceeded 2,000,000 operating cycles. The second
character is the number 3: the unit has exceeded
300,000 operating cycles. The total number of
operating cycles is composed of the numbers
2 and 3. This gives a total number of operating
cycles of 2,300,000.
GP_95_ACU_NF.indd 19
klick
26
26
26
29
I
Z
29
I
Z
29
I
Z
GB-19
3 Disconnect the system from the electrical power
supply.
▷ The heater may only be disconnected from the
electrical power supply once the device has been
switched off and post-cooling is complete.
4 Shut off the gas supply.
13.09.20 22:53
