Idiomas disponibles
Idiomas disponibles
PROBLEMS
The machine fails to
come on.
The machine does not
fill with water
EN
Insufficient washing
Insufficient rinsing.
34
TROUBLESHOOTING
CAUSES
Main switch disconnected.
Water cock shut.
Fill pipe filter dirty.
Rinsing nozzles clogged.
Overflow pipe incorrectly inserted.
Hood's opened
Washing filter dirty.
Washing nozzles clogged.
Washing rod clogged.
Insufficient or no detergent.
Machine temperature not reached.
Washing conditions insufficient.
Rinsing nozzles clogged.
Boiler clogged with scaling.
Low mains pressure (less than 200
kPa).
Temperature insufficient.
Incorrectly positioned nozzles or
nozzles deformed.
SOLUTIONS
Turn on the switch.
Turn on the cock.
Detach the fill pipe (7 Fig. 6) and clean the filter (5).
Unscrew and clean the nozzles (19 Fig. 8) under running
water.
Make sure that the overflow pipe (13 Fig. 8) has been
correctly inserted.
Close the hood
Clean the filter (14 Fig. 8).
Demount and clean the washing nozzles under running
water (19).
Demount and clean the rod (17 Fig. 8).
Top up the detergent in the canister and check its con-
centration.
Wait until the tank water has reached the right tempe-
rature (50°C).
Make sure that the washing phase takes place correctly.
Unscrew the nozzles (18 Fig. 8) and clean them under
running water.
Contact the after-sales service.
Wait until the pressure returns or purchase a pressure
pump.
Contact the after-sales service.
Make sure that the nozzles are in their correct positions.
Replace any damaged ones.
